Manufactured in India, supplied in Hungary
Soundproof curtains in Hungary
We manufacture soundproof curtains at our own plant at Palwal in Haryana, India, and supply them into Hungary. Made at our own plant in India and routed through Koper, then rail and road inland.
- Build-up
- 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face
- Total thickness
- 10 to 12 mm
- Weight
- 5.5 kg per sq m
- Reduction
- Up to 30 dB
- STC
- 30
- Lead time
- Made to size
- Minimum order
- 5 pieces
- ASTM E90
- Standard sizes, 8 x 4 ft and 5 x 4 ft
- Made at our own plant, Palwal, Haryana, India
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What this is, and what it changes in a Hungary room
A layered curtain with a mass loaded vinyl core, used where an opening has to stay an opening. It is the answer for a doorway, a stage, a partition that must move, not a substitute for a wall.
Work reaching us from Hungary is mostly automotive plants, offices and service centres, hotels, panel block housing, schools, hospitals.
Masonry blocks with timber floors in older stock and panel housing in concrete, both with hard finishes.
- Full height with return Curtain taken floor to soffit with a side return and an overlap, because the gap is what leaks, not the fabric.
- Track with a seal Ceiling track plus a floor seal or drape, so the perimeter is closed when it is drawn.
- Double layer at a doorway Two curtains with an air gap where a single layer will not reach the target.
- What it will not do A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Hungary.
02 / Specification sheet
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Standard5.5 kg per sq m. Openings, stages, temporary partitions
| Build-up | 800 GSM face, foam, 3 mm SoundBlanket MLV core, foam, 800 GSM face |
|---|---|
| Total thickness | 10 to 12 mm |
| Weight | 5.5 kg per sq m |
| Reduction | Up to 30 dB |
| STC | 30 |
| Test standard | ASTM E90 |
| Standard sizes | 8 x 4 ft and 5 x 4 ft |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / What drives the brief
The Hungary conditions that change the answer
- Landlocked, so plan the inland leg
Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- Automotive plant noise
Presses, robots and conveyors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall.
- Panel block housing
Prefabricated concrete passes speech and footfall between flats through thin connected elements. Mass is the only reliable answer.
- Budapest conversions
Old buildings turned into offices and hotels, with tall rooms and hard plaster that hold sound far too long.
- The housing stock
Masonry blocks with timber floors in older stock and panel housing in concrete, both with hard finishes.
- The studio and content scene
A strong film and music production sector using converted buildings with good mass and hard surfaces.
For a Hungary practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Durability
The Hungary climate decides the material list
Hungary is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
Supply into Hungary, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Koper, then rail and road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Koper, then rail |
| Packing | Rolled and bagged with track and fixings listed separately. |
| Lead time | Made to size. Confirmed at quote. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Koper, then rail and road inland. Air freight for samples and urgent quantities.
The same 5 piece minimum applies on export.
| Any size | 5 pieces |
|---|
Curtains are made to size, so the minimum is counted in pieces rather than area.
06 / Straight talk
Where this goes wrong, said plainly
-
The wrong product for the problem
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Hungary certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Hungary: questions we are actually asked
Is there a Hungary factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Hungary as the manufacturer rather than through a dealer. Made at our own plant in India and routed through Koper, then rail and road inland. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Hungary job?
Koper then rail and road. We quote the sea leg and the inland leg separately so the programme runs on real dates. Presses, robots and conveyors are low frequency and structure-borne. Enclosure at the source rather than absorption on a far wall. Those two things move the build-up far more than the panel figure does.
Does Hungary weather shorten the life of this material?
Hungary is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Hungary?
ships from: Palwal, Haryana, India, arrives at: Koper, then rail and road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy soundproof curtains for?
A curtain is only as good as its perimeter. Hung short, hung flat against a frame, or with a gap at the side, it will measure nothing like the figure on the sheet. We quote the detail, not just the fabric.
How is the order packed and what is the minimum?
The same 5 piece minimum applies on export. Any size, 5 pieces. Curtains are made to size, so the minimum is counted in pieces rather than area. Rolled and bagged with track and fixings listed separately.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for soundproof curtains are on the main product page. This page covers what that means for a project in Hungary.