Manufactured in India, supplied in Houston
Wood wool acoustic panels in Houston
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Houston. Made at our own plant in India and shipped straight into the Port of Houston.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The product, described honestly, for a Houston brief
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Houston is mostly control rooms and plant, corporate offices, medical and clinical spaces, schools, home theatres.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Houston.
02 / Data sheet
The published figures, unchanged by location
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
On a Houston job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What decides the build-up in Houston
- Humidity and long transit
Gulf humidity is hard on mineral products. Our PET felt does not absorb moisture, shed fibre or feed mould, and it travels a long sea leg sealed and dry.
- The port is the advantage
Container arrives in Houston itself, so there is no long domestic trucking leg. That is the practical reason a factory in India can be competitive here on landed cost.
- Light frame walls behave differently
Gypsum on studs is not masonry. It is lighter, it resonates, and it passes low frequency far more easily, so the answer is added mass and a decoupled layer rather than more absorption.
- Industrial noise is a mass problem
Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that, and we will tell you so rather than sell them to you.
- Assembly and performance rooms
Churches, school gyms and multipurpose halls double as performance spaces, which means a room designed for neither speech nor music has to carry both.
- School and campus buildings
Public school buildings run long corridors with hard floors and lay-in tile ceilings that were chosen for cost, not for speech. Classroom reverberation and corridor spill are the two complaints, and both respond to ceiling area rather than wall panels.
If you are specifying for a Houston project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Durability
The Houston climate decides the material list
Houston is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
For a Houston interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Supply
Getting it to Houston, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of Houston, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Port of Houston |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. The sea leg to the US Gulf is long, so plan the full door to door window into the programme. We give you real dates, not optimistic ones.
Sea freight direct into the Port of Houston, then a short road run to site. Air freight for samples, colour approvals and genuinely urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Worth knowing
The things worth knowing before you place the order
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Houston certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Houston: questions we are actually asked
Is there a Houston factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Houston as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into the Port of Houston. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Houston enquiry?
Container arrives in Houston itself, so there is no long domestic trucking leg. That is the practical reason a factory in India can be competitive here on landed cost. Gypsum on studs is not masonry. It is lighter, it resonates, and it passes low frequency far more easily, so the answer is added mass and a decoupled layer rather than more absorption. Those two things move the build-up far more than the panel figure does.
Is this the right material for Houston conditions?
Houston is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
How does an order actually travel to Houston?
ships from: Palwal, Haryana, India, arrives at: Port of Houston, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg to the US Gulf is long, so plan the full door to door window into the programme. We give you real dates, not optimistic ones.
When are wood wool acoustic panels the wrong purchase?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.