Manufactured in India, supplied in Houston
Acoustic panels in Houston
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Houston. Made at our own plant in India and shipped straight into the Port of Houston.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Houston brief
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Houston is mostly control rooms and plant, corporate offices, medical and clinical spaces, schools, home theatres.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Houston.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Data sheet
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Houston job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / What drives the brief
The Houston conditions that change the answer
- Humidity and long transit
Gulf humidity is hard on mineral products. Our PET felt does not absorb moisture, shed fibre or feed mould, and it travels a long sea leg sealed and dry.
- The port is the advantage
Container arrives in Houston itself, so there is no long domestic trucking leg. That is the practical reason a factory in India can be competitive here on landed cost.
- Light frame walls behave differently
Gypsum on studs is not masonry. It is lighter, it resonates, and it passes low frequency far more easily, so the answer is added mass and a decoupled layer rather than more absorption.
- Industrial noise is a mass problem
Compressors, generators and process plant are low frequency and structure-borne. Panels on a wall will not touch that, and we will tell you so rather than sell them to you.
- School and campus buildings
Public school buildings run long corridors with hard floors and lay-in tile ceilings that were chosen for cost, not for speech. Classroom reverberation and corridor spill are the two complaints, and both respond to ceiling area rather than wall panels.
- The studio and content scene
Home and project studios go into basements and converted garages with equipment budgets far ahead of the building. The room leaks to the floor above long before it sounds wrong inside.
Architects working in Houston usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
What the Houston climate rules in and rules out
Houston is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
How material reaches a Houston site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of Houston, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Port of Houston |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. The sea leg to the US Gulf is long, so plan the full door to door window into the programme. We give you real dates, not optimistic ones.
Sea freight direct into the Port of Houston, then a short road run to site. Air freight for samples, colour approvals and genuinely urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Houston
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
In finished rooms
Houston: questions we are actually asked
Is there a Houston factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Houston as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into the Port of Houston. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Houston job?
Container arrives in Houston itself, so there is no long domestic trucking leg. That is the practical reason a factory in India can be competitive here on landed cost. Gypsum on studs is not masonry. It is lighter, it resonates, and it passes low frequency far more easily, so the answer is added mass and a decoupled layer rather than more absorption. Those two things move the build-up far more than the panel figure does.
Is this the right material for Houston conditions?
Houston is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
How quickly can material reach a site in Houston?
ships from: Palwal, Haryana, India, arrives at: Port of Houston, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg to the US Gulf is long, so plan the full door to door window into the programme. We give you real dates, not optimistic ones.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What is the minimum order and how is it packed?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.