Manufactured in India, supplied in Gorakhpur
Wood wool acoustic panels in Gorakhpur
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Gorakhpur. Gorakhpur is growing quickly, and most of what we supply goes into new institutional buildings rather than into retrofits.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / Start here
The material, and what it actually does on a Gorakhpur job
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Gorakhpur is mostly hospitals and clinics, colleges and schools, auditoriums, offices, hotels, banquet halls.
Independent houses and builder flats in brick and RC frame, often built floor by floor for different households, so the slab between them was never detailed as a separation.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Gorakhpur.
02 / Specification
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
On a Gorakhpur job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
What we see driving Gorakhpur briefs
- New institutional buildings
Concrete, tile and glass built to a budget and a deadline. The rooms are hard, and nobody costed the acoustics into the original BOQ.
- Medical privacy
Consult rooms and counselling spaces need conversations to stay in the room. That is a partition and door question before it is a panel question.
- Teaching spaces at scale
Large lecture rooms with hard surfaces defeat the teacher. Targeted absorption recovers intelligibility without a full refit.
- Two to three days by road
A dedicated truck from Palwal, with samples sent ahead so the material is approved before the order.
- Assembly and performance rooms
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
- School and campus buildings
Large government and private schools in concrete and tile with very large class sizes, and long open corridors that feed every classroom off them.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
Durability in Gorakhpur, before acoustics is discussed
Gorakhpur is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
What the route into Gorakhpur actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | two to three days |
| Dispatch | 2 to 4 working days |
| To site | two to three days |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly nine hundred kilometres, normally two to three days on a dedicated truck.
500 sq ft, about 46 sq m.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Gorakhpur presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Gorakhpur: questions we are actually asked
Are these wood wool acoustic panels made in Gorakhpur?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Gorakhpur as the manufacturer rather than through a dealer. Gorakhpur is growing quickly, and most of what we supply goes into new institutional buildings rather than into retrofits. You buy at factory prices with one consistent batch across the order.
Why would a Gorakhpur build-up differ from anywhere else?
Concrete, tile and glass built to a budget and a deadline. The rooms are hard, and nobody costed the acoustics into the original BOQ. Consult rooms and counselling spaces need conversations to stay in the room. That is a partition and door question before it is a panel question. Those two things move the build-up far more than the panel figure does.
How does the Gorakhpur climate affect this product?
Gorakhpur is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How does an order actually travel to Gorakhpur?
made at: Our own plant, Palwal, Haryana, reaches site in: two to three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will wood wool acoustic panels not do?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
How is the order packed and what is the minimum?
500 sq ft, about 46 sq m. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Tell us the room, we will tell you the build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.