Manufactured in India, supplied in Gorakhpur
Wooden slat acoustic panels in Gorakhpur
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Gorakhpur. Gorakhpur is growing quickly, and most of what we supply goes into new institutional buildings rather than into retrofits.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a Gorakhpur job
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Gorakhpur is mostly hospitals and clinics, colleges and schools, auditoriums, offices, hotels, banquet halls.
Independent houses and builder flats in brick and RC frame, often built floor by floor for different households, so the slab between them was never detailed as a separation.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Gorakhpur.
02 / Specification
The published figures, unchanged by location
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / Local conditions
What we see driving Gorakhpur briefs
- New institutional buildings
Concrete, tile and glass built to a budget and a deadline. The rooms are hard, and nobody costed the acoustics into the original BOQ.
- Medical privacy
Consult rooms and counselling spaces need conversations to stay in the room. That is a partition and door question before it is a panel question.
- Teaching spaces at scale
Large lecture rooms with hard surfaces defeat the teacher. Targeted absorption recovers intelligibility without a full refit.
- Two to three days by road
A dedicated truck from Palwal, with samples sent ahead so the material is approved before the order.
- Assembly and performance rooms
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
If you are specifying for a Gorakhpur project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Conditions
Why the climate in Gorakhpur changes the material, not the target
Gorakhpur is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
For a Gorakhpur interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
What the route into Gorakhpur actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | two to three days |
| Dispatch | 2 to 4 working days |
| To site | two to three days |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly nine hundred kilometres, normally two to three days on a dedicated truck.
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Gorakhpur presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Gorakhpur: questions we are actually asked
Where are the wooden slat acoustic panels you supply to Gorakhpur actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Gorakhpur as the manufacturer rather than through a dealer. Gorakhpur is growing quickly, and most of what we supply goes into new institutional buildings rather than into retrofits. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Gorakhpur enquiry?
Concrete, tile and glass built to a budget and a deadline. The rooms are hard, and nobody costed the acoustics into the original BOQ. Consult rooms and counselling spaces need conversations to stay in the room. That is a partition and door question before it is a panel question. Those two things move the build-up far more than the panel figure does.
Will this material last in the Gorakhpur climate?
Gorakhpur is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
When would material land on a Gorakhpur site?
made at: Our own plant, Palwal, Haryana, reaches site in: two to three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will wooden slat acoustic panels not do?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What is the minimum order and how is it packed?
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.