Manufactured in India, supplied in Frankfurt
Wood wool acoustic panels in Frankfurt
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Frankfurt. Made at our own plant in India.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / Start here
The product, described honestly, for a Frankfurt brief
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Frankfurt is mostly tower office floors, trading and call floors, data and plant rooms, hotels, studios, clinics.
Altbau blocks have solid masonry walls and timber joist floors, so airborne noise is controlled but footfall is not. Neubau is concrete with better floors and much harder surfaces.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Frankfurt.
02 / Data sheet
The published figures, unchanged by location
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / On the ground
What decides the build-up in Frankfurt
- Towers full of glass
Full height glazing, raised floors and exposed slabs give sound nothing to land on. The ceiling has to do most of the work, and it has to do it without breaking the design.
- Speech privacy is a business requirement
On banking and trading floors the issue is not comfort, it is who can hear what. Absorption plus masking beats absorption alone every time.
- Plant rooms and equipment halls
Generators, chillers and cooling plant sit close to occupied space and close to neighbours. Mass and a resilient break do more than any lining.
- Trade fair and hotel programmes
Messe dates do not move. We give honest dispatch and transit windows so a fit-out is not sitting waiting on a container that will not land in time.
- Assembly and performance rooms
Concert halls, church buildings and civic Saal spaces are long-reverberation rooms where any intervention has to be reversible and visually disciplined.
- School and campus buildings
School and university buildings are built to a high thermal standard with hard, cleanable surfaces. Speech clarity in classrooms and long corridors is where the acoustic budget goes.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
What the Frankfurt climate rules in and rules out
Frankfurt is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
For a Frankfurt interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
Supply into Frankfurt, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Hamburg or Rotterdam by sea, or Frankfurt airport when the date demands it |
| Dispatch | 4 to 7 working days |
| Freight | Sea, or air into FRA |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Hamburg or Rotterdam, then road along the Rhine corridor. Air freight into Frankfurt for samples, replacements and genuinely urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Frankfurt presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Frankfurt: questions we are actually asked
Is there a Frankfurt factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Frankfurt as the manufacturer rather than through a dealer. Made at our own plant in India. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Frankfurt job?
Full height glazing, raised floors and exposed slabs give sound nothing to land on. The ceiling has to do most of the work, and it has to do it without breaking the design. On banking and trading floors the issue is not comfort, it is who can hear what. Absorption plus masking beats absorption alone every time. Those two things move the build-up far more than the panel figure does.
Does Frankfurt weather shorten the life of this material?
Frankfurt is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
What is the delivery time into Frankfurt?
ships from: Palwal, Haryana, India, arrives at: Hamburg or Rotterdam by sea, or Frankfurt airport when the date demands it, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Where do wood wool acoustic panels fail to help?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.