Manufactured in India, supplied in Frankfurt
PET felt acoustic panels in Frankfurt
We manufacture PET felt acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Frankfurt. Made at our own plant in India.
- Material
- 100% PET non-woven, no added binder
- Thickness
- 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Custom thickness
- 4 to 24 mm
- Panel size
- 1220 x 2440 mm standard, 4 x 8 ft
- Maximum size
- 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
- Lead time
- 4 to 7 working days for standard colours and thicknesses
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Frankfurt brief
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. It absorbs mid and high frequency energy and finishes as the visible surface, so it is both the acoustic layer and the finish.
Work reaching us from Frankfurt is mostly tower office floors, trading and call floors, data and plant rooms, hotels, studios, clinics.
Altbau blocks have solid masonry walls and timber joist floors, so airborne noise is controlled but footfall is not. Neubau is concrete with better floors and much harder surfaces.
- Direct to wall Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
- On a 25 to 50 mm air gap The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
- Over a porous backing Panel over mineral or PET backing where the room needs genuine low mid control.
- What it will not do It absorbs. It does not block.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for PET felt panels are on the main product page. This page covers what that means for a project in Frankfurt.
02 / Specification sheet
One specification sheet, the same in every market
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- EchoCore 151500 GSM. Offices, classrooms, general commercial
- EchoPro 181800 GSM. Studios, auditoria, rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Material | 100% PET non-woven, no added binder |
|---|---|
| Thickness | 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent |
| Custom thickness | 4 to 24 mm |
| Panel size | 1220 x 2440 mm standard, 4 x 8 ft |
| Maximum size | 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft |
| Density range | 1200 to 3600 GSM |
| NRC | 0.30 at 9 mm, rising with thickness and air gap |
| Test standard | ASTM C423 |
On a Frankfurt job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / What drives the brief
The Frankfurt conditions that change the answer
- Towers full of glass
Full height glazing, raised floors and exposed slabs give sound nothing to land on. The ceiling has to do most of the work, and it has to do it without breaking the design.
- Speech privacy is a business requirement
On banking and trading floors the issue is not comfort, it is who can hear what. Absorption plus masking beats absorption alone every time.
- Plant rooms and equipment halls
Generators, chillers and cooling plant sit close to occupied space and close to neighbours. Mass and a resilient break do more than any lining.
- Trade fair and hotel programmes
Messe dates do not move. We give honest dispatch and transit windows so a fit-out is not sitting waiting on a container that will not land in time.
- School and campus buildings
School and university buildings are built to a high thermal standard with hard, cleanable surfaces. Speech clarity in classrooms and long corridors is where the acoustic budget goes.
Architects working in Frankfurt usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Conditions
What the Frankfurt climate rules in and rules out
Frankfurt is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
For a Frankfurt interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Getting it there
What the route into Frankfurt actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Hamburg or Rotterdam by sea, or Frankfurt airport when the date demands it |
| Dispatch | 4 to 7 working days |
| Freight | Sea, or air into FRA |
| Packing | Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote. |
| Lead time | 4 to 7 working days for standard colours and thicknesses. Grooved and custom colours take longer, and we say so before you order. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Hamburg or Rotterdam, then road along the Rhine corridor. Air freight into Frankfurt for samples, replacements and genuinely urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container, for the best price per panel and the lowest freight per panel |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Worth knowing
Where this goes wrong, said plainly
-
The wrong product for the problem
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Frankfurt
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Frankfurt: questions we are actually asked
Are these PET felt acoustic panels made in Frankfurt?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Frankfurt as the manufacturer rather than through a dealer. Made at our own plant in India. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Frankfurt job?
Full height glazing, raised floors and exposed slabs give sound nothing to land on. The ceiling has to do most of the work, and it has to do it without breaking the design. On banking and trading floors the issue is not comfort, it is who can hear what. Absorption plus masking beats absorption alone every time. Those two things move the build-up far more than the panel figure does.
Will this material last in the Frankfurt climate?
Frankfurt is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
When would material land on a Frankfurt site?
ships from: Palwal, Haryana, India, arrives at: Hamburg or Rotterdam by sea, or Frankfurt airport when the date demands it, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Where do PET felt acoustic panels fail to help?
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load, because the price per panel and the freight per panel both fall sharply and a part load pays for space it does not use. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container, for the best price per panel and the lowest freight per panel. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.