Manufactured in India, supplied in Florida
Acoustic foam and BassBloc in Florida
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Florida. Made at our own plant in India and shipped into Jacksonville, Miami or Port Everglades, so the container lands in the state rather than crossing the country.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / Start here
The product, described honestly, for a Florida brief
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Florida is mostly condominium towers, hotels and hospitality, multifamily, offices, clinics, schools.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Florida.
02 / Specification sheet
Published specification, identical wherever we ship it
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Where a consultant is already engaged on a Florida project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
The Florida conditions that change the answer
- Block and concrete construction
Storm-rated building means real mass in the walls. Airborne transfer is rarely the issue. Impact through slabs and live interiors are.
- Impact through hard floors
Tile over a concrete slab passes footfall straight down between units. A resilient underlay before the finish is the fix.
- Heat and humidity all year
PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag and hold damp.
- Ports in the state
Containers land in Florida itself, so there is no cross-country leg and the landed cost stays predictable.
- The housing stock
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- The studio and content scene
Home and project studios go into basements and converted garages with equipment budgets far ahead of the building. The room leaks to the floor above long before it sounds wrong inside.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Durability
What the Florida climate rules in and rules out
Florida is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
How material reaches a Florida site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Jacksonville, Miami or Port Everglades, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Jacksonville or Miami |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Jacksonville, Miami or Port Everglades, then road to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Before you buy
What we will tell you that a reseller will not
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Florida certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
How it looks once it is installed
Florida: questions we are actually asked
Do you manufacture acoustic foam and BassBloc in Florida?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Florida as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Jacksonville, Miami or Port Everglades, so the container lands in the state rather than crossing the country. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Florida enquiry?
Storm-rated building means real mass in the walls. Airborne transfer is rarely the issue. Impact through slabs and live interiors are. Tile over a concrete slab passes footfall straight down between units. A resilient underlay before the finish is the fix. Those two things move the build-up far more than the panel figure does.
Will this material last in the Florida climate?
Florida is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
How quickly can material reach a site in Florida?
ships from: Palwal, Haryana, India, arrives at: Jacksonville, Miami or Port Everglades, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
Is there a minimum order, and how does it arrive?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Drawings in, BOQ and a delivered date out
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.