For projects in Finland
Office acoustics and soundproofing in Finland
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted. Balanced mechanical ventilation with heat recovery runs year round, so duct-borne noise is the dominant source.
- Open plan
- Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
- Meeting rooms
- Privacy between rooms. That is partition and door work, not panels.
- Cabins and calls
- Short RT so a call sounds clean. A small amount of well placed absorber.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The product, described honestly, for a Finland brief
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted.
Balanced mechanical ventilation with heat recovery runs year round, so duct-borne noise is the dominant source.
Work reaching us from Finland is mostly apartments, offices, schools, healthcare, timber buildings, studios, auditoriums.
- Timber construction at scale A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption.
- Targets are written and checked Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
- Sealed for months Buildings close up through a long winter with ventilation running constantly, so noise accumulates inside and plant noise matters more than street noise.
- Open plan Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for office acoustics are on the main product page. This page covers what that means for a project in Finland.
Office and conference room acoustics Acoustic office screens
02 / The build-up
What goes where, from the structure in
-
Layer 1
Ceiling baffles and clouds
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. In Finland, balanced mechanical ventilation with heat recovery runs year round, so duct-borne noise is the dominant source.
Mixed with services. Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Finland, church buildings, culture houses and school halls are hard volumes with long decay.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
-
Layer 3
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Finland, classroom acoustics are regulated and open plan learning spaces are common, making intelligibility the target.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
Architects working in Finland usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / In this market
What we see driving Finland briefs
- Timber construction at scale
A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption.
- Targets are written and checked
Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
- Sealed for months
Buildings close up through a long winter with ventilation running constantly, so noise accumulates inside and plant noise matters more than street noise.
- A long sea leg
One of the longer routes we operate. Ordering to a real schedule matters, so we quote the full window rather than the port date.
- Plant and HVAC
Balanced mechanical ventilation with heat recovery runs year round, so duct-borne noise is the dominant source.
04 / Room by room
Where the money goes on a Finland project
-
Open plan
Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption.
- Ceiling baffles and clouds, 100% PET non-woven, the panel family
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Acoustic carpet and rugs, High density polyester
-
Meeting rooms
Privacy between rooms. That is partition and door work, not panels. Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
- Ceiling baffles and clouds, 9 to 24 mm
- PET felt acoustic panels, 4 to 24 mm
- Acoustic carpet and rugs, Felt
-
Cabins and calls
Short RT so a call sounds clean. A small amount of well placed absorber. Buildings close up through a long winter with ventilation running constantly, so noise accumulates inside and plant noise matters more than street noise.
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- PET felt acoustic panels, 1220 x 2440 mm standard, 4 x 8 ft
- Acoustic carpet and rugs, 64 sq ft per pack
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Conditions
Why the climate in Finland changes the material, not the target
Finland is cool and damp, with long heating seasons and cold external walls, and that narrows the material list before acoustics is discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The failure we design against here is condensation behind linings in older, poorly insulated stock.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Worth knowing
The six errors that cost the most
-
Lining every wall while leaving the ceiling bare
The ceiling is almost always the largest untreated surface, so leaving it out means paying for panels that cannot reach the target.
-
Treating a privacy problem with absorption
Privacy is a transmission problem. Absorption makes the room sound nicer and does not stop anyone hearing through the wall.
-
Glass cabins specified without a door and head detail
A 6 mm undercut under a door leaves a hole the size of a brick. The wall around it is then decorative.
-
Treating it as a generic Finland job
A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption.
05 / Getting it there
Supply into Finland, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Helsinki or Kotka, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Helsinki |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Helsinki or Kotka, then road to site. Air freight for samples and urgent quantities.
Questions from Finland projects
What makes office acoustics and soundproofing different in Finland?
Balanced mechanical ventilation with heat recovery runs year round, so duct-borne noise is the dominant source. Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
Where should the budget go first on a Finland project?
Open plan. Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Meeting rooms. Privacy between rooms. That is partition and door work, not panels.
Do you have an office or installation team in Finland?
No. We manufacture in India and supply into Finland. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Finland site?
ships from: Palwal, Haryana, India, arrives at: Helsinki or Kotka, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What goes wrong most often on this kind of project?
Lining every wall while leaving the ceiling bare. Treating a privacy problem with absorption.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.