Manufactured in India, supplied in Finland
Acoustic panels in Finland
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Finland. Made at our own plant in India and shipped into Helsinki or Kotka.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What you are buying, and what it fixes in Finland
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Finland is mostly apartments, offices, schools, healthcare, timber buildings, studios, auditoriums.
Concrete apartment blocks and timber housing with very tight envelopes and hard internal surfaces.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Finland.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Finland job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
What the buildings in Finland do to the specification
- Targets are written and checked
Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
- Timber construction at scale
A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption.
- Sealed for months
Buildings close up through a long winter with ventilation running constantly, so noise accumulates inside and plant noise matters more than street noise.
- A long sea leg
One of the longer routes we operate. Ordering to a real schedule matters, so we quote the full window rather than the port date.
- School and campus buildings
Classroom acoustics are regulated and open plan learning spaces are common, making intelligibility the target.
- The studio and content scene
A strong recording culture working to measured targets inside concrete structures with good mass.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Durability
The Finland climate decides the material list
Finland is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
Supply into Finland, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Helsinki or Kotka, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Helsinki |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Helsinki or Kotka, then road to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Finland certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
In finished rooms
Finland: questions we are actually asked
Are these acoustic panels made in Finland?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Finland as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Helsinki or Kotka. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Finland job?
Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches. A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption. Those two things move the build-up far more than the panel figure does.
Does Finland weather shorten the life of this material?
Finland is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How does an order actually travel to Finland?
ships from: Palwal, Haryana, India, arrives at: Helsinki or Kotka, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.