For projects in Finland
Cinema and multiplex soundproofing in Finland
Screens stacked beside and above each other, each running full range at high level. Bleed between auditoria is the failure everyone hears, and it is decided by the shell, not the finishes. Church buildings, culture houses and school halls are hard volumes with long decay.
- Screen to screen
- Independent construction between auditoria, with services broken at the line.
- In room response
- Heavy absorption on side and rear walls so the mix is heard as intended.
- Plant and projection
- Equipment noise into the auditorium, treated at source.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The product, described honestly, for a Finland brief
Screens stacked beside and above each other, each running full range at high level. Bleed between auditoria is the failure everyone hears, and it is decided by the shell, not the finishes.
Church buildings, culture houses and school halls are hard volumes with long decay.
Work reaching us from Finland is mostly apartments, offices, schools, healthcare, timber buildings, studios, auditoriums.
- Targets are written and checked Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
- Timber construction at scale A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption.
- Sealed for months Buildings close up through a long winter with ventilation running constantly, so noise accumulates inside and plant noise matters more than street noise.
- Screen to screen Independent construction between auditoria, with services broken at the line.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for cinema soundproofing are on the main product page. This page covers what that means for a project in Finland.
02 / The build-up
What goes where, from the structure in
-
Layer 1
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Finland, balanced mechanical ventilation with heat recovery runs year round, so duct-borne noise is the dominant source.
Floating floor. Resilient layer and deck, to break impact energy before it reaches the structure.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Finland, church buildings, culture houses and school halls are hard volumes with long decay.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
-
Layer 3
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Finland, classroom acoustics are regulated and open plan learning spaces are common, making intelligibility the target.
Over a porous backing. Panel over mineral or PET backing where the room needs genuine low mid control.
For a Finland practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
03 / In this market
What the buildings in Finland do to the specification
- Targets are written and checked
Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
- Timber construction at scale
A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption.
- Sealed for months
Buildings close up through a long winter with ventilation running constantly, so noise accumulates inside and plant noise matters more than street noise.
- A long sea leg
One of the longer routes we operate. Ordering to a real schedule matters, so we quote the full window rather than the port date.
- Assembly and performance rooms
Church buildings, culture houses and school halls are hard volumes with long decay.
04 / Room by room
Space by space, for Finland briefs
-
Screen to screen
Independent construction between auditoria, with services broken at the line. Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Acoustic carpet and rugs, 4 mm
- PET felt acoustic panels, 4 to 24 mm
-
In room response
Heavy absorption on side and rear walls so the mix is heard as intended. A great deal of building is timber, which is light. Low frequency passes easily, so mass and decoupling do the work rather than more absorption.
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- Acoustic carpet and rugs, High density polyester
- PET felt acoustic panels, 1220 x 2440 mm standard, 4 x 8 ft
-
Plant and projection
Equipment noise into the auditorium, treated at source. Buildings close up through a long winter with ventilation running constantly, so noise accumulates inside and plant noise matters more than street noise.
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Acoustic carpet and rugs, Felt
- PET felt acoustic panels, 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
04 / Climate and durability
What the Finland climate rules in and rules out
Finland is cool and damp, with long heating seasons and cold external walls, and that narrows the material list before acoustics is discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The failure we design against here is condensation behind linings in older, poorly insulated stock.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Before you buy
The six errors that cost the most
-
A shared service void running across the wall line
A treated wall under a bare hard ceiling gives you a fraction of the reduction you paid for, and the room still sounds wrong.
-
Treating the auditorium to fix bleed from the next screen
Small on the drawing, expensive on site, and almost always found after handover.
-
Doors and lobbies specified late and undersized
A 6 mm undercut under a door leaves a hole the size of a brick. The wall around it is then decorative.
-
Treating it as a generic Finland job
Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
05 / Getting it there
How material reaches a Finland site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Helsinki or Kotka, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Helsinki |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Helsinki or Kotka, then road to site. Air freight for samples and urgent quantities.
Questions from Finland projects
What makes cinema and multiplex soundproofing different in Finland?
Church buildings, culture houses and school halls are hard volumes with long decay. Work here arrives with numbers attached and someone verifies them afterwards. Send us the target and we will say plainly what our material reaches.
Where should the budget go first on a Finland project?
Screen to screen. Independent construction between auditoria, with services broken at the line. In room response. Heavy absorption on side and rear walls so the mix is heard as intended.
Do you have an office or installation team in Finland?
No. We manufacture in India and supply into Finland. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Finland site?
ships from: Palwal, Haryana, India, arrives at: Helsinki or Kotka, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What goes wrong most often on this kind of project?
A shared service void running across the wall line. Treating the auditorium to fix bleed from the next screen.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.