Manufactured in India, supplied in Faridabad
Wooden slat acoustic panels in Faridabad
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Faridabad. Faridabad is thirty kilometres from our plant, the closest market we serve.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The material, and what it actually does on a Faridabad job
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Faridabad is mostly factories and plant rooms, offices and canteens, schools, clinics, banquet halls, housing.
Builder floors and RC frame apartments with tile and stone floors, often built floor by floor for separate households.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Faridabad.
02 / Specification
The published figures, unchanged by location
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
Where a consultant is already engaged on a Faridabad project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
What we see driving Faridabad briefs
- Thirty kilometres away
The shortest run we have. Same day delivery, immediate samples, and problems sorted in person rather than by email.
- Plant noise is a mass problem
Compressors, presses and blowers are low frequency and structure-borne. We will say so before quoting rather than selling you panels.
- Industry beside housing
Units sit close to homes, so noise leaving the building matters as much as noise inside it. Two different treatments.
- Cabins inside sheds
An office built into an industrial building has a noise floor nobody planned for. Mass in the partition beats any ceiling tile.
- Assembly and performance rooms
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
If you are specifying for a Faridabad project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
Durability in Faridabad, before acoustics is discussed
Faridabad is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Supply
How material reaches a Faridabad site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | same day |
| Dispatch | 2 to 4 working days |
| To site | same day |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Same day by road from Palwal, about thirty kilometres. A dedicated truck or a shared vehicle, whichever suits the quantity.
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Faridabad certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Faridabad: questions we are actually asked
Do you manufacture wooden slat acoustic panels in Faridabad?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Faridabad as the manufacturer rather than through a dealer. Faridabad is thirty kilometres from our plant, the closest market we serve. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Faridabad enquiry?
The shortest run we have. Same day delivery, immediate samples, and problems sorted in person rather than by email. Compressors, presses and blowers are low frequency and structure-borne. We will say so before quoting rather than selling you panels. Those two things move the build-up far more than the panel figure does.
How does the Faridabad climate affect this product?
Faridabad is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How quickly can material reach a site in Faridabad?
made at: Our own plant, Palwal, Haryana, reaches site in: same day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wooden slat acoustic panels for?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Is there a minimum order, and how does it arrive?
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.