For projects in Faridabad
HVAC, plant and machine noise control in Faridabad
Noise with a source. Almost every honest fix is at the machine, the duct or the plant room, and almost nothing useful happens by lining the far wall of the occupied space. Dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens.
- At source
- Enclosure, barrier or anti vibration mounts at the machine.
- In the path
- Duct lining, attenuators and lagging on the first run out of the plant.
- At the receiver
- Only after the first two, and only for what is left.
- Quote
- From a plan and a section, within 48 hours
01 / The product
What you are buying, and what it fixes in Faridabad
Noise with a source. Almost every honest fix is at the machine, the duct or the plant room, and almost nothing useful happens by lining the far wall of the occupied space.
Dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens.
Work reaching us from Faridabad is mostly factories and plant rooms, offices and canteens, schools, clinics, banquet halls, housing.
- Industry beside housing Units sit close to homes, so noise leaving the building matters as much as noise inside it. Two different treatments.
- Thirty kilometres away The shortest run we have. Same day delivery, immediate samples, and problems sorted in person rather than by email.
- Plant noise is a mass problem Compressors, presses and blowers are low frequency and structure-borne. We will say so before quoting rather than selling you panels.
- At source Enclosure, barrier or anti vibration mounts at the machine.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for HVAC and plant noise control are on the main product page. This page covers what that means for a project in Faridabad.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Faridabad, dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
-
Layer 2
Wood wool acoustic panels
Wood fibre bound into a rigid board with an open texture. In Faridabad, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Direct fix. Mechanically fixed to the soffit or wall. Durable and simple.
-
Layer 3
Ceiling baffles and clouds
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. In Faridabad, classrooms are concrete and tile with bare walls and high ceilings, and class sizes push levels up. Corridors act as reverberation chambers that feed every room off them.
Horizontal clouds. Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
We would rather argue about the build-up at design stage than on site. See how we support architects.
03 / In this market
What we see driving Faridabad briefs
- Industry beside housing
Units sit close to homes, so noise leaving the building matters as much as noise inside it. Two different treatments.
- Thirty kilometres away
The shortest run we have. Same day delivery, immediate samples, and problems sorted in person rather than by email.
- Plant noise is a mass problem
Compressors, presses and blowers are low frequency and structure-borne. We will say so before quoting rather than selling you panels.
- Cabins inside sheds
An office built into an industrial building has a noise floor nobody planned for. Mass in the partition beats any ceiling tile.
- Plant and HVAC
Dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens.
04 / Room by room
Where the money goes on a Faridabad project
-
At source
Enclosure, barrier or anti vibration mounts at the machine. Units sit close to homes, so noise leaving the building matters as much as noise inside it. Two different treatments.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Wood wool acoustic panels, 20 mm
- Ceiling baffles and clouds, Made to the drawing, standard and custom
-
In the path
Duct lining, attenuators and lagging on the first run out of the plant. The shortest run we have. Same day delivery, immediate samples, and problems sorted in person rather than by email.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Wood wool acoustic panels, 400 kg per cubic metre
- Ceiling baffles and clouds, Both faces work, which is why suspended area outperforms the same area laid flat
-
At the receiver
Only after the first two, and only for what is left. Compressors, presses and blowers are low frequency and structure-borne. We will say so before quoting rather than selling you panels.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Wood wool acoustic panels, 0.30
- Ceiling baffles and clouds, ASTM C423
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
04 / Climate and durability
Durability in Faridabad, before acoustics is discussed
Faridabad is hot summers, mild winters and a distinct wet season, and that narrows the material list before acoustics is discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The failure we design against here is wet-season humidity behind linings.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Straight talk
What we watch go wrong on jobs like this
-
Absorption on the office wall for a plant room problem
Plant noise treated as a room problem is the most reliable way to spend a budget and change nothing anyone can hear.
-
Lagging a duct that is carrying the noise as breakout from the fan
Noise with a source is fixed at the source. Treating the receiving room is the expensive way to get a small result.
-
Ignoring structure borne vibration through the mounts
This is the one that comes back as a second fit-out rather than a snag.
-
Treating it as a generic Faridabad job
Units sit close to homes, so noise leaving the building matters as much as noise inside it. Two different treatments.
05 / Route to site
What the route into Faridabad actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | same day |
| Dispatch | 2 to 4 working days |
| To site | same day |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Same day by road from Palwal, about thirty kilometres. A dedicated truck or a shared vehicle, whichever suits the quantity.
Questions from Faridabad projects
What makes HVAC, plant and machine noise control different in Faridabad?
Dense industrial belts mean compressors, presses, generator sets and blower plant sit close to offices and canteens. The shortest run we have. Same day delivery, immediate samples, and problems sorted in person rather than by email.
Where should the budget go first on a Faridabad project?
At source. Enclosure, barrier or anti vibration mounts at the machine. In the path. Duct lining, attenuators and lagging on the first run out of the plant.
Do you have an office or installation team in Faridabad?
No. We manufacture in India and supply into Faridabad. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Faridabad site?
made at: Our own plant, Palwal, Haryana, reaches site in: same day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Absorption on the office wall for a plant room problem. Lagging a duct that is carrying the noise as breakout from the fan.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send a plan and a section, get a real build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.