Manufactured in India, supplied in Egypt
Wooden slat acoustic panels in Egypt
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Egypt. Made at our own plant in India and shipped into Alexandria, Port Said or Sokhna.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Egypt brief
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Egypt is mostly new development and government buildings, hotels and resorts, offices, hospitals, schools, venues.
Reinforced concrete frames with block infill and hard tile floors, in blocks that sit close together with narrow light wells between them.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Egypt.
02 / Specification
The published figures, unchanged by location
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / Local conditions
What decides the build-up in Egypt
- Convenient sailings
Our routes to Europe already pass this way, which keeps frequency good and freight competitive.
- Development at scale
Very large single orders where the same detail repeats across many buildings. Batch consistency matters more than the figure on one sheet.
- Heat, dust and sealed buildings
Closed up with heavy cooling, so plant noise accumulates inside and rooms stay hard and live.
- Assembly and function spaces
Large halls in concrete and stone where speech stops being intelligible well before the room sounds wrong.
- Assembly and performance rooms
Mosques, churches and cinema halls are large hard volumes carrying amplified speech and music.
If you are specifying for a Egypt project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Conditions
Why the climate in Egypt changes the material, not the target
Egypt is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
For a Egypt interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Supply
Getting it to Egypt, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Alexandria, Port Said or Sokhna, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Alexandria or Port Said |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Alexandria, Port Said or Sokhna, then road to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Egypt certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Egypt: questions we are actually asked
Are these wooden slat acoustic panels made in Egypt?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Egypt as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Alexandria, Port Said or Sokhna. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Egypt project?
Our routes to Europe already pass this way, which keeps frequency good and freight competitive. Very large single orders where the same detail repeats across many buildings. Batch consistency matters more than the figure on one sheet. Those two things move the build-up far more than the panel figure does.
Is this the right material for Egypt conditions?
Egypt is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
What is the delivery time into Egypt?
ships from: Palwal, Haryana, India, arrives at: Alexandria, Port Said or Sokhna, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wooden slat acoustic panels for?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.