Manufactured in India, supplied in Denver
Acoustic carpet and rugs in Denver
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Denver. Made at our own plant in India, shipped into Houston or the West Coast and trucked inland, with the road leg quoted separately so the programme runs on real dates.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / Start here
What this material is and where it earns its place in Denver
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Denver is mostly multifamily apartments, offices, breweries and taprooms, schools, clinics, home theatres.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Denver.
02 / Specification
The published figures, unchanged by location
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
Where a consultant is already engaged on a Denver project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
The Denver conditions that change the answer
- Taprooms and hard rooms
Breweries and taprooms are concrete, steel and glass by design. They are loud by construction, not by accident, and the ceiling plane is usually the only place to fix it.
- Light frame multifamily at volume
Thousands of units built to the same separating detail. If the detail underperforms it underperforms everywhere, which makes it worth solving on the drawing.
- No port, so plan the road leg
Everything arrives at a coast and drives in. We quote the sea leg and the road leg separately so you can see where the time goes.
- Dry air, sealed buildings
Our PET felt does not shed fibre or degrade in dry conditions, and it holds its shape in rooms that stay closed and conditioned.
- Assembly and performance rooms
Churches, school gyms and multipurpose halls double as performance spaces, which means a room designed for neither speech nor music has to carry both.
- The housing stock
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
The Denver climate decides the material list
Denver is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
Getting it to Denver, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Houston or the West Coast, then road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea, then road inland |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Houston or the West Coast, then road inland to Denver. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Denver presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Denver: questions we are actually asked
Do you manufacture acoustic carpet and rugs in Denver?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Denver as the manufacturer rather than through a dealer. Made at our own plant in India, shipped into Houston or the West Coast and trucked inland, with the road leg quoted separately so the programme runs on real dates. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Denver job?
Thousands of units built to the same separating detail. If the detail underperforms it underperforms everywhere, which makes it worth solving on the drawing. Breweries and taprooms are concrete, steel and glass by design. They are loud by construction, not by accident, and the ceiling plane is usually the only place to fix it. Those two things move the build-up far more than the panel figure does.
Does Denver weather shorten the life of this material?
Denver is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
How quickly can material reach a site in Denver?
ships from: Palwal, Haryana, India, arrives at: Houston or the West Coast, then road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What will acoustic carpet and rugs not do?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
How is the order packed and what is the minimum?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.