For projects in Denver
HVAC, plant and machine noise control in Denver
Noise with a source. Almost every honest fix is at the machine, the duct or the plant room, and almost nothing useful happens by lining the far wall of the occupied space. Packaged rooftop units and ducted forced air are standard, so noise arrives through the duct rather than through the wall. Lining the first three metres of duct and treating the return path is usually the whole job.
- At source
- Enclosure, barrier or anti vibration mounts at the machine.
- In the path
- Duct lining, attenuators and lagging on the first run out of the plant.
- At the receiver
- Only after the first two, and only for what is left.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this material is and where it earns its place in Denver
Noise with a source. Almost every honest fix is at the machine, the duct or the plant room, and almost nothing useful happens by lining the far wall of the occupied space.
Packaged rooftop units and ducted forced air are standard, so noise arrives through the duct rather than through the wall. Lining the first three metres of duct and treating the return path is usually the whole job.
Work reaching us from Denver is mostly multifamily apartments, offices, breweries and taprooms, schools, clinics, home theatres.
- Taprooms and hard rooms Breweries and taprooms are concrete, steel and glass by design. They are loud by construction, not by accident, and the ceiling plane is usually the only place to fix it.
- Light frame multifamily at volume Thousands of units built to the same separating detail. If the detail underperforms it underperforms everywhere, which makes it worth solving on the drawing.
- No port, so plan the road leg Everything arrives at a coast and drives in. We quote the sea leg and the road leg separately so you can see where the time goes.
- At source Enclosure, barrier or anti vibration mounts at the machine.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for HVAC and plant noise control are on the main product page. This page covers what that means for a project in Denver.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Denver, packaged rooftop units and ducted forced air are standard, so noise arrives through the duct rather than through the wall. Lining the first three metres of duct and treating the return path is usually the whole job.
Duct and plant wrap. Membrane wrapped over the duct with a decoupling layer beneath, sealed at every lap.
-
Layer 2
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Denver, churches, school gyms and multipurpose halls double as performance spaces, which means a room designed for neither speech nor music has to carry both.
Floating floor. Resilient layer and deck, to break impact energy before it reaches the structure.
-
Layer 3
Ceiling baffles and clouds
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. In Denver, public school buildings run long corridors with hard floors and lay-in tile ceilings that were chosen for cost, not for speech. Classroom reverberation and corridor spill are the two complaints, and both respond to ceiling area rather than wall panels.
Horizontal clouds. Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
Architects working in Denver usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
03 / In this market
What we see driving Denver briefs
- Taprooms and hard rooms
Breweries and taprooms are concrete, steel and glass by design. They are loud by construction, not by accident, and the ceiling plane is usually the only place to fix it.
- Light frame multifamily at volume
Thousands of units built to the same separating detail. If the detail underperforms it underperforms everywhere, which makes it worth solving on the drawing.
- No port, so plan the road leg
Everything arrives at a coast and drives in. We quote the sea leg and the road leg separately so you can see where the time goes.
- Dry air, sealed buildings
Our PET felt does not shed fibre or degrade in dry conditions, and it holds its shape in rooms that stay closed and conditioned.
- Plant and HVAC
Packaged rooftop units and ducted forced air are standard, so noise arrives through the duct rather than through the wall. Lining the first three metres of duct and treating the return path is usually the whole job.
04 / Room by room
What each space in a Denver project needs
-
At source
Enclosure, barrier or anti vibration mounts at the machine. Breweries and taprooms are concrete, steel and glass by design. They are loud by construction, not by accident, and the ceiling plane is usually the only place to fix it.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Acoustic foam and BassBloc, 20 mm
- Ceiling baffles and clouds, Made to the drawing, standard and custom
-
In the path
Duct lining, attenuators and lagging on the first run out of the plant. Thousands of units built to the same separating detail. If the detail underperforms it underperforms everywhere, which makes it worth solving on the drawing.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Acoustic foam and BassBloc, 100 kg per cubic metre
- Ceiling baffles and clouds, Both faces work, which is why suspended area outperforms the same area laid flat
-
At the receiver
Only after the first two, and only for what is left. Everything arrives at a coast and drives in. We quote the sea leg and the road leg separately so you can see where the time goes.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Acoustic foam and BassBloc, 100 to 500 Hz
- Ceiling baffles and clouds, ASTM C423
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Climate
Durability in Denver, before acoustics is discussed
Denver is mild summers and cold, wet winters, and that narrows the material list before acoustics is discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The failure we design against here is condensation and cold bridging behind new linings.
On a Denver job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Before you buy
Six mistakes that turn into a second fit-out
-
Absorption on the office wall for a plant room problem
Noise with a source is fixed at the source. Treating the receiving room is the expensive way to get a small result.
-
Lagging a duct that is carrying the noise as breakout from the fan
Plant noise treated as a room problem is the most reliable way to spend a budget and change nothing anyone can hear.
-
Ignoring structure borne vibration through the mounts
This is the one that comes back as a second fit-out rather than a snag.
-
Treating it as a generic Denver job
Breweries and taprooms are concrete, steel and glass by design. They are loud by construction, not by accident, and the ceiling plane is usually the only place to fix it.
05 / Getting it there
What the route into Denver actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Houston or the West Coast, then road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea, then road inland |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Houston or the West Coast, then road inland to Denver. Air freight for samples and urgent quantities.
Questions from Denver projects
What makes HVAC, plant and machine noise control different in Denver?
Packaged rooftop units and ducted forced air are standard, so noise arrives through the duct rather than through the wall. Lining the first three metres of duct and treating the return path is usually the whole job. Thousands of units built to the same separating detail. If the detail underperforms it underperforms everywhere, which makes it worth solving on the drawing.
Where should the budget go first on a Denver project?
At source. Enclosure, barrier or anti vibration mounts at the machine. In the path. Duct lining, attenuators and lagging on the first run out of the plant.
Do you have an office or installation team in Denver?
No. We manufacture in India and supply into Denver. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Denver site?
ships from: Palwal, Haryana, India, arrives at: Houston or the West Coast, then road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What goes wrong most often on this kind of project?
Absorption on the office wall for a plant room problem. Lagging a duct that is carrying the noise as breakout from the fan.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.