Manufactured in India, supplied in Delhi
PET felt acoustic panels in Delhi
We manufacture PET felt acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Delhi. Delhi is the closest major market to our plant, so material reaches most sites the same day it leaves us and samples arrive the next morning.
- Material
- 100% PET non-woven, no added binder
- Thickness
- 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Custom thickness
- 4 to 24 mm
- Panel size
- 1220 x 2440 mm standard, 4 x 8 ft
- Maximum size
- 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
- Lead time
- 4 to 7 working days for standard colours and thicknesses
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The product, described honestly, for a Delhi brief
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. It absorbs mid and high frequency energy and finishes as the visible surface, so it is both the acoustic layer and the finish.
Work reaching us from Delhi is mostly offices, studios, banquet halls, clinics, schools, home theatres, restaurants, showrooms.
Builder flats, barsatis and independent houses in RC frame with brick infill, stacked floor by floor for separate households with no isolation in the slab.
- Direct to wall Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
- On a 25 to 50 mm air gap The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
- Over a porous backing Panel over mineral or PET backing where the room needs genuine low mid control.
- What it will not do It absorbs. It does not block.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for PET felt panels are on the main product page. This page covers what that means for a project in Delhi.
02 / Specification
The numbers, and they do not move by city
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. Offices, classrooms, general commercial
- EchoPro 181800 GSM. Studios, auditoria, rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Material | 100% PET non-woven, no added binder |
|---|---|
| Thickness | 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent |
| Custom thickness | 4 to 24 mm |
| Panel size | 1220 x 2440 mm standard, 4 x 8 ft |
| Maximum size | 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft |
| Density range | 1200 to 3600 GSM |
| NRC | 0.30 at 9 mm, rising with thickness and air gap |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / Local conditions
What we see driving Delhi briefs
- Old walls and new towers
Lutyens bungalows, 1970s DDA flats and glass towers all fail differently. We ask what the wall actually is before quoting anything.
- We can come and look
Delhi is close enough that a site visit is straightforward. On a difficult room that is worth more than any amount of specification over email.
- Traffic and generators get in
On most Delhi sites the noise arrives through windows, shafts and gaps rather than through the wall itself. Fixing the weakest path first saves money.
- Same day from the plant
Ninety kilometres of road. Low freight cost, next-day samples, and a damaged sheet replaced without a two-week wait.
- School and campus buildings
Classrooms are concrete and tile with bare walls and high ceilings, and class sizes push levels up. Corridors act as reverberation chambers that feed every room off them.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
The Delhi climate decides the material list
Delhi is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
How material reaches a Delhi site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | same or next day |
| Dispatch | 2 to 4 working days |
| To site | same or next day |
| Packing | Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote. |
| Lead time | 4 to 7 working days for standard colours and thicknesses. Grooved and custom colours take longer, and we say so before you order. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Same day or next day by road from Palwal, about ninety kilometres south. Small consignments on a shared vehicle, full loads on a dedicated truck.
From 10 panels for 9 mm EchoCore 15. Other grades and thicknesses carry their own minimum.
| 9 mm EchoCore 15, 1500 GSM | 10 panels, 320 sq ft |
|---|---|
| 9 mm EchoPro 18, 1800 GSM | 50 panels, 1,600 sq ft |
| 9 mm EchoMax 22, 2200 GSM | 100 panels, 3,200 sq ft |
| 12 mm, 2400 GSM | 30 panels, 960 sq ft |
| 18 mm, 3000 GSM | 50 panels, 1,600 sq ft |
| 24 mm, 3600 GSM | 50 panels, 1,600 sq ft |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Straight talk
What we will tell you that a reseller will not
-
The wrong product for the problem
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Delhi
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Delhi: questions we are actually asked
Are these PET felt acoustic panels made in Delhi?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Delhi as the manufacturer rather than through a dealer. Delhi is the closest major market to our plant, so material reaches most sites the same day it leaves us and samples arrive the next morning. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Delhi enquiry?
Delhi is close enough that a site visit is straightforward. On a difficult room that is worth more than any amount of specification over email. Lutyens bungalows, 1970s DDA flats and glass towers all fail differently. We ask what the wall actually is before quoting anything. Those two things move the build-up far more than the panel figure does.
How does the Delhi climate affect this product?
Delhi is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How does an order actually travel to Delhi?
made at: Our own plant, Palwal, Haryana, reaches site in: same or next day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are PET felt acoustic panels the wrong purchase?
It absorbs. It does not block. A PET panel on a shared wall will make the room sound better and will not stop the neighbour being heard. If the brief is stopping noise passing through a wall or floor, the answer is mass and decoupling, and we will say so before quoting.
Is there a minimum order, and how does it arrive?
From 10 panels for 9 mm EchoCore 15. Other grades and thicknesses carry their own minimum. 9 mm EchoCore 15, 1500 GSM, 10 panels, 320 sq ft. 9 mm EchoPro 18, 1800 GSM, 50 panels, 1,600 sq ft. 9 mm EchoMax 22, 2200 GSM, 100 panels, 3,200 sq ft. 12 mm, 2400 GSM, 30 panels, 960 sq ft. 18 mm, 3000 GSM, 50 panels, 1,600 sq ft. 24 mm, 3600 GSM, 50 panels, 1,600 sq ft. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped, cut sheets interleaved. Packing list and weights issued with the quote.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.