Manufactured in India, supplied in Delhi
Ceiling baffles and clouds in Delhi
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Delhi. Delhi is the closest major market to our plant, so material reaches most sites the same day it leaves us and samples arrive the next morning.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / Start here
What this material is and where it earns its place in Delhi
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Delhi is mostly offices, studios, banquet halls, clinics, schools, home theatres, restaurants, showrooms.
Builder flats, barsatis and independent houses in RC frame with brick infill, stacked floor by floor for separate households with no isolation in the slab.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Delhi.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Specification sheet
Published specification, identical wherever we ship it
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
On a Delhi job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What we see driving Delhi briefs
- Old walls and new towers
Lutyens bungalows, 1970s DDA flats and glass towers all fail differently. We ask what the wall actually is before quoting anything.
- We can come and look
Delhi is close enough that a site visit is straightforward. On a difficult room that is worth more than any amount of specification over email.
- Traffic and generators get in
On most Delhi sites the noise arrives through windows, shafts and gaps rather than through the wall itself. Fixing the weakest path first saves money.
- Same day from the plant
Ninety kilometres of road. Low freight cost, next-day samples, and a damaged sheet replaced without a two-week wait.
- School and campus buildings
Classrooms are concrete and tile with bare walls and high ceilings, and class sizes push levels up. Corridors act as reverberation chambers that feed every room off them.
If you are specifying for a Delhi project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
Why the climate in Delhi changes the material, not the target
Delhi is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
For a Delhi interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
Getting it to Delhi, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | same or next day |
| Dispatch | 2 to 4 working days |
| To site | same or next day |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Same day or next day by road from Palwal, about ninety kilometres south. Small consignments on a shared vehicle, full loads on a dedicated truck.
500 sq ft, about 46 sq m, across baffles and clouds together.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Straight talk
Where this goes wrong, said plainly
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Delhi
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Delhi: questions we are actually asked
Are these ceiling baffles and clouds made in Delhi?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Delhi as the manufacturer rather than through a dealer. Delhi is the closest major market to our plant, so material reaches most sites the same day it leaves us and samples arrive the next morning. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Delhi job?
Delhi is close enough that a site visit is straightforward. On a difficult room that is worth more than any amount of specification over email. Lutyens bungalows, 1970s DDA flats and glass towers all fail differently. We ask what the wall actually is before quoting anything. Those two things move the build-up far more than the panel figure does.
How does the Delhi climate affect this product?
Delhi is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
When would material land on a Delhi site?
made at: Our own plant, Palwal, Haryana, reaches site in: same or next day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will ceiling baffles and clouds not do?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
What is the minimum order and how is it packed?
500 sq ft, about 46 sq m, across baffles and clouds together. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.