Manufactured in India, supplied in Dallas
Wood wool acoustic panels in Dallas
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Dallas. Made at our own plant in India, shipped into Houston and trucked north, with air freight through DFW when a date genuinely will not move.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
What this material is and where it earns its place in Dallas
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Dallas is mostly corporate campuses, multifamily, schools, clinics, restaurants, home theatres, studios.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Dallas.
02 / Data sheet
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Where a consultant is already engaged on a Dallas project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
What we see driving Dallas briefs
- Multifamily party walls
Apartments built in light frame share a wall that has far less mass than people expect. Neighbour complaints here are a mass and decoupling problem, and treating the room will not fix them.
- Campus scale repetition
A corporate campus means the same detail across many floors and buildings. The value is in consistent material and a build-up that is easy for a crew to repeat correctly.
- Programmes that will not slip
Fast build schedules leave no room for a container arriving late. We quote the sea leg and the road leg separately so you can see where the time actually goes.
- Big rooms, big systems
Dedicated home theatres here are larger than most, which makes low frequency control the main event rather than an afterthought.
- Assembly and performance rooms
Churches, school gyms and multipurpose halls double as performance spaces, which means a room designed for neither speech nor music has to carry both.
- School and campus buildings
Public school buildings run long corridors with hard floors and lay-in tile ceilings that were chosen for cost, not for speech. Classroom reverberation and corridor spill are the two complaints, and both respond to ceiling area rather than wall panels.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
What the Dallas climate rules in and rules out
Dallas is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Getting it there
Supply into Dallas, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of Houston, then road north to Dallas |
| Dispatch | 4 to 7 working days |
| Freight | Sea, or air into DFW |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Add the sea leg to Houston and the road leg north, and plan the full window into the programme. We quote it in the open.
Sea freight into the Port of Houston, then road to Dallas. Air freight into DFW for samples, colour approvals and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Before you buy
What we will tell you that a reseller will not
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Dallas certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Dallas: questions we are actually asked
Do you manufacture wood wool acoustic panels in Dallas?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Dallas as the manufacturer rather than through a dealer. Made at our own plant in India, shipped into Houston and trucked north, with air freight through DFW when a date genuinely will not move. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Dallas job?
Apartments built in light frame share a wall that has far less mass than people expect. Neighbour complaints here are a mass and decoupling problem, and treating the room will not fix them. A corporate campus means the same detail across many floors and buildings. The value is in consistent material and a build-up that is easy for a crew to repeat correctly. Those two things move the build-up far more than the panel figure does.
Is this the right material for Dallas conditions?
Dallas is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
How quickly can material reach a site in Dallas?
ships from: Palwal, Haryana, India, arrives at: Port of Houston, then road north to Dallas, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Add the sea leg to Houston and the road leg north, and plan the full window into the programme. We quote it in the open.
When are wood wool acoustic panels the wrong purchase?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Is there a minimum order, and how does it arrive?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.