Manufactured in India, supplied in Dallas
Acoustic panels in Dallas
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Dallas. Made at our own plant in India, shipped into Houston and trucked north, with air freight through DFW when a date genuinely will not move.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The product, described honestly, for a Dallas brief
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Dallas is mostly corporate campuses, multifamily, schools, clinics, restaurants, home theatres, studios.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Dallas.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification sheet
Published specification, identical wherever we ship it
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What we see driving Dallas briefs
- Campus scale repetition
A corporate campus means the same detail across many floors and buildings. The value is in consistent material and a build-up that is easy for a crew to repeat correctly.
- Multifamily party walls
Apartments built in light frame share a wall that has far less mass than people expect. Neighbour complaints here are a mass and decoupling problem, and treating the room will not fix them.
- Programmes that will not slip
Fast build schedules leave no room for a container arriving late. We quote the sea leg and the road leg separately so you can see where the time actually goes.
- Big rooms, big systems
Dedicated home theatres here are larger than most, which makes low frequency control the main event rather than an afterthought.
- School and campus buildings
Public school buildings run long corridors with hard floors and lay-in tile ceilings that were chosen for cost, not for speech. Classroom reverberation and corridor spill are the two complaints, and both respond to ceiling area rather than wall panels.
- The studio and content scene
Home and project studios go into basements and converted garages with equipment budgets far ahead of the building. The room leaks to the floor above long before it sounds wrong inside.
Architects working in Dallas usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
The Dallas climate decides the material list
Dallas is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Logistics
Supply into Dallas, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Port of Houston, then road north to Dallas |
| Dispatch | 4 to 7 working days |
| Freight | Sea, or air into DFW |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Add the sea leg to Houston and the road leg north, and plan the full window into the programme. We quote it in the open.
Sea freight into the Port of Houston, then road to Dallas. Air freight into DFW for samples, colour approvals and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Dallas presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
The material in real interiors
Dallas: questions we are actually asked
Is there a Dallas factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Dallas as the manufacturer rather than through a dealer. Made at our own plant in India, shipped into Houston and trucked north, with air freight through DFW when a date genuinely will not move. You buy at factory prices with one consistent batch across the order.
Why would a Dallas build-up differ from anywhere else?
Apartments built in light frame share a wall that has far less mass than people expect. Neighbour complaints here are a mass and decoupling problem, and treating the room will not fix them. A corporate campus means the same detail across many floors and buildings. The value is in consistent material and a build-up that is easy for a crew to repeat correctly. Those two things move the build-up far more than the panel figure does.
How does the Dallas climate affect this product?
Dallas is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
How does an order actually travel to Dallas?
ships from: Palwal, Haryana, India, arrives at: Port of Houston, then road north to Dallas, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Add the sea leg to Houston and the road leg north, and plan the full window into the programme. We quote it in the open.
Where do acoustic panels fail to help?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What is the minimum order and how is it packed?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.