Manufactured in India, supplied in Cape Town
Acoustic panels in Cape Town
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Cape Town. Made at our own plant in India and shipped straight into Cape Town, so the container lands at the city rather than crossing the country by road.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The material, and what it actually does on a Cape Town job
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Cape Town is mostly hotels and restaurants, heritage conversions, offices, apartments, schools, studios.
Brick and concrete construction with hard floors. Townhouse and cluster developments share walls that were built for structure, not for separation.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Cape Town.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Data sheet
Published specification, identical wherever we ship it
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / Local conditions
What we see driving Cape Town briefs
- Hospitality is the market
Hotels and restaurants where the room is part of what the guest is paying for, judged when it is completely full.
- The port is at the city
Direct sea into Cape Town avoids the long inland haul, which makes the landed cost and the date both easier to hold.
- Heritage fabric stays put
Older buildings in the city cannot be structurally altered. Work has to be internal, shallow and ideally reversible.
- Wind and coastal damp
PET felt does not absorb moisture or feed mould, which matters on exposed coastal elevations.
- School and campus buildings
Classrooms are hard walled with high ceilings and large class sizes, and school halls double as assembly and performance spaces.
- The studio and content scene
A strong music and production culture works out of converted commercial and residential rooms with no isolation plan.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
The Cape Town climate decides the material list
Cape Town is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
Getting it to Cape Town, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Cape Town, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Cape Town |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Cape Town, then a short road run to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
The things worth knowing before you place the order
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Cape Town
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
In finished rooms
Cape Town: questions we are actually asked
Are these acoustic panels made in Cape Town?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Cape Town as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Cape Town, so the container lands at the city rather than crossing the country by road. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Cape Town project?
Direct sea into Cape Town avoids the long inland haul, which makes the landed cost and the date both easier to hold. Older buildings in the city cannot be structurally altered. Work has to be internal, shallow and ideally reversible. Those two things move the build-up far more than the panel figure does.
Does Cape Town weather shorten the life of this material?
Cape Town is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
What is the delivery time into Cape Town?
ships from: Palwal, Haryana, India, arrives at: Cape Town, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic panels not do?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
Is there a minimum order, and how does it arrive?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Drawings in, BOQ and a delivered date out
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.