For projects in Cambodia
Office acoustics and soundproofing in Cambodia
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted. Split units with condensers on facades and in narrow gaps between buildings.
- Open plan
- Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
- Meeting rooms
- Privacy between rooms. That is partition and door work, not panels.
- Cabins and calls
- Short RT so a call sounds clean. A small amount of well placed absorber.
- Quote
- From a plan and a section, within 48 hours
01 / Start here
What you are buying, and what it fixes in Cambodia
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted.
Split units with condensers on facades and in narrow gaps between buildings.
Work reaching us from Cambodia is mostly garment and manufacturing units, hotels, offices, schools, hospitals, restaurants.
- Generators are part of the building Standby generation runs often enough to be a permanent condition and sits close to occupied space. Enclosure at the source is the only real fix.
- Garment floors at scale Large production halls with continuous machine noise and rooms where instructions and alarms must be understood.
- Tropical humidity PET felt does not hold moisture or feed mould, which decides whether a ceiling survives more than a couple of seasons.
- Open plan Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for office acoustics are on the main product page. This page covers what that means for a project in Cambodia.
Office and conference room acoustics Acoustic office screens
02 / The build-up
The stack, in the order it is installed
-
Layer 1
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Cambodia, split units with condensers on facades and in narrow gaps between buildings.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
-
Layer 2
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Cambodia, temples, function halls and conference rooms are hard volumes carrying amplified speech.
Ceiling first. In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
-
Layer 3
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Cambodia, classrooms are hard and naturally ventilated, open to street and corridor noise.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
We would rather argue about the build-up at design stage than on site. See how we support architects.
03 / In this market
What we see driving Cambodia briefs
- Generators are part of the building
Standby generation runs often enough to be a permanent condition and sits close to occupied space. Enclosure at the source is the only real fix.
- Garment floors at scale
Large production halls with continuous machine noise and rooms where instructions and alarms must be understood.
- Tropical humidity
PET felt does not hold moisture or feed mould, which decides whether a ceiling survives more than a couple of seasons.
- Hospitality in heritage towns
Hotel work where guest room isolation and function room acoustics are the recurring briefs.
- Plant and HVAC
Split units with condensers on facades and in narrow gaps between buildings.
04 / Room by room
Space by space, for Cambodia briefs
-
Open plan
Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Standby generation runs often enough to be a permanent condition and sits close to occupied space. Enclosure at the source is the only real fix.
- Ceiling baffles and clouds, 100% PET non-woven, the panel family
- Acoustic carpet and rugs, 4 mm
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
-
Meeting rooms
Privacy between rooms. That is partition and door work, not panels. Large production halls with continuous machine noise and rooms where instructions and alarms must be understood.
- Ceiling baffles and clouds, 9 to 24 mm
- Acoustic carpet and rugs, High density polyester
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
-
Cabins and calls
Short RT so a call sounds clean. A small amount of well placed absorber. PET felt does not hold moisture or feed mould, which decides whether a ceiling survives more than a couple of seasons.
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- Acoustic carpet and rugs, Felt
- SoundBlanket mass loaded vinyl, 5 x 1.2 m, 6 sq m per roll
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Climate
Why the climate in Cambodia changes the material, not the target
Cambodia is warm and humid through most of the year, with a long wet season, and that narrows the material list before acoustics is discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The failure we design against here is mould, sagging fabric finishes and swelling in timber.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Read this first
Six mistakes that turn into a second fit-out
-
Lining every wall while leaving the ceiling bare
The ceiling is almost always the largest untreated surface, so leaving it out means paying for panels that cannot reach the target.
-
Treating a privacy problem with absorption
Nobody has ever achieved speech privacy with a panel. Privacy needs mass, a sealed head detail and a door that actually closes.
-
Glass cabins specified without a door and head detail
A 6 mm undercut under a door leaves a hole the size of a brick. The wall around it is then decorative.
-
Treating it as a generic Cambodia job
Standby generation runs often enough to be a permanent condition and sits close to occupied space. Enclosure at the source is the only real fix.
05 / Route to site
How material reaches a Cambodia site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Sihanoukville, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Sihanoukville |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Sihanoukville, then road to site. Air freight for samples and urgent quantities.
Questions from Cambodia projects
What makes office acoustics and soundproofing different in Cambodia?
Split units with condensers on facades and in narrow gaps between buildings. Standby generation runs often enough to be a permanent condition and sits close to occupied space. Enclosure at the source is the only real fix.
Where should the budget go first on a Cambodia project?
Open plan. Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Meeting rooms. Privacy between rooms. That is partition and door work, not panels.
Do you have an office or installation team in Cambodia?
No. We manufacture in India and supply into Cambodia. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Cambodia site?
ships from: Palwal, Haryana, India, arrives at: Sihanoukville, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Lining every wall while leaving the ceiling bare. Treating a privacy problem with absorption.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.