Home > Bhubaneswar > Acoustic panels
Manufactured in India, supplied in Bhubaneswar
Acoustic panels in Bhubaneswar
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Bhubaneswar. Bhubaneswar is a planned institutional city near a cyclone coast, so the buildings are new and the climate is hard on the wrong material.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / The material
What this is, and what it changes in a Bhubaneswar room
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Bhubaneswar is mostly IT and institutional campuses, hospitals, colleges, auditoriums, hotels, offices.
RC frame apartments and houses with hard floors, built for heat and heavy monsoon along a cyclone exposed coast.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Bhubaneswar.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / The numbers
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / Local conditions
The Bhubaneswar conditions that change the answer
- Coastal humidity and cyclones
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products sag within a couple of seasons.
- New campuses at scale
The same classroom or office detail repeated across many blocks. Consistency across the order is where the value is.
- Teaching and assembly rooms
Large halls in concrete and tile that defeat the speaker long before anyone calls the room echoey.
- Three to four days by road
A dedicated truck from Palwal, confirmed before dispatch, with samples sent ahead.
- School and campus buildings
New university and school campuses in concrete and tile, with lecture halls and hostels repeating the same detail.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
Architects working in Bhubaneswar usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
What the Bhubaneswar climate rules in and rules out
Bhubaneswar is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Supply
Getting it to Bhubaneswar, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three to four days |
| Dispatch | 2 to 4 working days |
| To site | three to four days |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly fifteen hundred kilometres, normally three to four days on a dedicated truck.
From 10 panels for 9 mm EchoCore 15. Other grades and thicknesses carry their own minimum.
| 9 mm EchoCore 15, 1500 GSM | 10 panels, 320 sq ft |
|---|---|
| 9 mm EchoPro 18, 1800 GSM | 50 panels, 1,600 sq ft |
| 9 mm EchoMax 22, 2200 GSM | 100 panels, 3,200 sq ft |
| 12 mm, 2400 GSM | 30 panels, 960 sq ft |
| 18 mm, 3000 GSM | 50 panels, 1,600 sq ft |
| 24 mm, 3600 GSM | 50 panels, 1,600 sq ft |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Straight talk
Four honest warnings before you buy
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Local approvals that nobody actually holds
We hold no Bhubaneswar certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The material in real interiors
Bhubaneswar: questions we are actually asked
Is there a Bhubaneswar factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bhubaneswar as the manufacturer rather than through a dealer. Bhubaneswar is a planned institutional city near a cyclone coast, so the buildings are new and the climate is hard on the wrong material. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Bhubaneswar enquiry?
The same classroom or office detail repeated across many blocks. Consistency across the order is where the value is. PET felt does not absorb moisture, rot or feed mould, which matters where mineral products sag within a couple of seasons. Those two things move the build-up far more than the panel figure does.
How does the Bhubaneswar climate affect this product?
Bhubaneswar is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Bhubaneswar?
made at: Our own plant, Palwal, Haryana, reaches site in: three to four days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What quantity do we have to order, and in what packaging?
From 10 panels for 9 mm EchoCore 15. Other grades and thicknesses carry their own minimum. 9 mm EchoCore 15, 1500 GSM, 10 panels, 320 sq ft. 9 mm EchoPro 18, 1800 GSM, 50 panels, 1,600 sq ft. 9 mm EchoMax 22, 2200 GSM, 100 panels, 3,200 sq ft. 12 mm, 2400 GSM, 30 panels, 960 sq ft. 18 mm, 3000 GSM, 50 panels, 1,600 sq ft. 24 mm, 3600 GSM, 50 panels, 1,600 sq ft. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Drawings in, BOQ and a delivered date out
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.