Manufactured in India, supplied in Barcelona
Acoustic foam and BassBloc in Barcelona
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Barcelona. Made at our own plant in India and shipped straight into Barcelona, so the container lands at the city and the road leg is short.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / Start here
What this is, and what it changes in a Barcelona room
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Barcelona is mostly eixample apartments, hotels and short lets, restaurants, offices, clinics, studios.
The Ensanche and equivalent city blocks stack flats around a patio with shared walls and slabs. Footfall and speech move between homes, which is a mass and isolation problem.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Barcelona.
02 / Specification
One specification sheet, the same in every market
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / Local conditions
What the buildings in Barcelona do to the specification
- Eixample blocks share everything
Flats stacked around an interior courtyard with tiled floors and hard plaster. Sound moves between homes through the structure and across the patio.
- Tourism conversions
Apartments turned into short lets put beds either side of walls that were never separating walls. Doors and corridors cause most complaints.
- Late streets
Venues and terraces operate late underneath homes, so containment decides how long they trade.
- The port is at the city
Direct sea into Barcelona keeps the road leg short and the landed cost predictable.
- The housing stock
The Ensanche and equivalent city blocks stack flats around a patio with shared walls and slabs. Footfall and speech move between homes, which is a mass and isolation problem.
- The studio and content scene
Studios sit inside residential blocks, so the neighbour above matters more than the room treatment.
If you are specifying for a Barcelona project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
Durability in Barcelona, before acoustics is discussed
Barcelona is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
How material reaches a Barcelona site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Barcelona, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Barcelona |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Barcelona, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Worth knowing
Where this goes wrong, said plainly
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Barcelona
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The material in real interiors
Barcelona: questions we are actually asked
Are these acoustic foam and BassBloc made in Barcelona?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Barcelona as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Barcelona, so the container lands at the city and the road leg is short. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Barcelona enquiry?
Flats stacked around an interior courtyard with tiled floors and hard plaster. Sound moves between homes through the structure and across the patio. Apartments turned into short lets put beds either side of walls that were never separating walls. Doors and corridors cause most complaints. Those two things move the build-up far more than the panel figure does.
Will this material last in the Barcelona climate?
Barcelona is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
When would material land on a Barcelona site?
ships from: Palwal, Haryana, India, arrives at: Barcelona, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic foam and BassBloc fail to help?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
Is there a minimum order, and how does it arrive?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send a plan and a section, get a real build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.