Manufactured in India, supplied in Bangkok
Acoustic foam and BassBloc in Bangkok
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Bangkok. Made at our own plant in India and shipped into Laem Chabang, roughly two hours from the city by road.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / Start here
What this is, and what it changes in a Bangkok room
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Bangkok is mostly condo towers, hotels and lounges, offices, restaurants, clinics, studios.
Concrete frame with block infill and hard tile floors throughout. Condominium party walls and slabs pass impact noise directly.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Bangkok.
02 / Specification
The published figures, unchanged by location
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
On a Bangkok job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What we see driving Bangkok briefs
- Concrete towers, live interiors
The structure blocks a lot already. The problem is tile, glass and stone inside making the room ring, and that is a treatment job.
- Elevated rail and traffic
Trains and traffic close to facades put noise in through glazing, not through the wall. Fix the window path first.
- Impact through slabs
Hard flooring over concrete passes footfall straight down. A resilient underlay before the finish is the fix.
- Heat and humidity all year
Our PET felt does not hold moisture or feed mould, which matters where mineral products sag in a tropical climate.
- The housing stock
Concrete frame with block infill and hard tile floors throughout. Condominium party walls and slabs pass impact noise directly.
- The studio and content scene
A large content and music production scene works out of rooms inside commercial buildings with thin partitions.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Conditions
Why the climate in Bangkok changes the material, not the target
Bangkok is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
For a Bangkok interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Supply
How material reaches a Bangkok site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Laem Chabang, then a short road run into Bangkok |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Laem Chabang |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Laem Chabang, then a short road run into Bangkok. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Worth knowing
What we will tell you that a reseller will not
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Bangkok
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
How it looks once it is installed
Bangkok: questions we are actually asked
Is there a Bangkok factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Bangkok as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Laem Chabang, roughly two hours from the city by road. You buy at factory prices with one consistent batch across the order.
Why would a Bangkok build-up differ from anywhere else?
The structure blocks a lot already. The problem is tile, glass and stone inside making the room ring, and that is a treatment job. Trains and traffic close to facades put noise in through glazing, not through the wall. Fix the window path first. Those two things move the build-up far more than the panel figure does.
Will this material last in the Bangkok climate?
Bangkok is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Bangkok?
ships from: Palwal, Haryana, India, arrives at: Laem Chabang, then a short road run into Bangkok, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic foam and BassBloc for?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
How is the order packed and what is the minimum?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.