Manufactured in India, supplied in Auckland
Wooden slat acoustic panels in Auckland
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Auckland. Made at our own plant in India and shipped straight into Auckland, so the container arrives at the city rather than a long domestic leg away.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / Start here
The product, described honestly, for a Auckland brief
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Auckland is mostly apartments and townhouses, offices, hospitality, schools, clinics, studios.
Timber frame with plasterboard linings, so walls have very little mass. Apartment and townhouse party walls need a second leaf rather than surface treatment.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Auckland.
02 / Data sheet
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
On a Auckland job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
What decides the build-up in Auckland
- Apartments built light and fast
Townhouse and apartment stock built quickly in timber frame. The separating construction is where noise complaints concentrate.
- Weathertightness shapes the build-up
Wall assemblies here are designed around drainage and drying. An acoustic layer has to work with that, not trap moisture in it.
- Volcanic ground, seismic detailing
Flexible junctions are required, so a rigid acoustic bridge across a movement joint is not acceptable.
- The port is in the city
Direct sea into Auckland keeps the road leg short, though the sea leg itself is long and we quote it fully.
- Assembly and performance rooms
School halls, marae and community centres carry speech and performance in the same hard room.
If you are specifying for a Auckland project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate and durability
The Auckland climate decides the material list
Auckland is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
For a Auckland interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Route to site
How material reaches a Auckland site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Auckland, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Auckland |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight direct into Auckland, then a short road run to site. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Auckland certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Auckland: questions we are actually asked
Do you manufacture wooden slat acoustic panels in Auckland?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Auckland as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Auckland, so the container arrives at the city rather than a long domestic leg away. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Auckland job?
Townhouse and apartment stock built quickly in timber frame. The separating construction is where noise complaints concentrate. Wall assemblies here are designed around drainage and drying. An acoustic layer has to work with that, not trap moisture in it. Those two things move the build-up far more than the panel figure does.
Is this the right material for Auckland conditions?
Auckland is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How quickly can material reach a site in Auckland?
ships from: Palwal, Haryana, India, arrives at: Auckland, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
What should you not buy wooden slat acoustic panels for?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What quantity do we have to order, and in what packaging?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.