For projects in Agra
Cinema and multiplex soundproofing in Agra
Screens stacked beside and above each other, each running full range at high level. Bleed between auditoria is the failure everyone hears, and it is decided by the shell, not the finishes. Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
- Screen to screen
- Independent construction between auditoria, with services broken at the line.
- In room response
- Heavy absorption on side and rear walls so the mix is heard as intended.
- Plant and projection
- Equipment noise into the auditorium, treated at source.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this is, and what it changes in a Agra room
Screens stacked beside and above each other, each running full range at high level. Bleed between auditoria is the failure everyone hears, and it is decided by the shell, not the finishes.
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
Work reaching us from Agra is mostly hotels and guest houses, footwear and leather units, restaurants, offices, schools, clinics.
- Guest rooms fail at the door Corridor noise and the room next door generate more complaints than room acoustics ever do. Door and partition detailing does that work.
- Footwear and leather units Machinery and presses running long shifts close to occupied areas. Enclosure at the source rather than lining the hall.
- Dense old city access Narrow lanes near the heritage area mean a lorry often cannot reach the door. Tell us and we break the pallets down.
- Screen to screen Independent construction between auditoria, with services broken at the line.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for cinema soundproofing are on the main product page. This page covers what that means for a project in Agra.
02 / The build-up
The build-up, layer by layer
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Agra, split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
-
Layer 2
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Agra, banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
Zoned. Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
-
Layer 3
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Agra, large government and private schools in concrete and tile with very large class sizes, and long open corridors that feed every classroom off them.
On a 25 to 50 mm air gap. The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
If you are specifying for a Agra project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / In this market
What we see driving Agra briefs
- Guest rooms fail at the door
Corridor noise and the room next door generate more complaints than room acoustics ever do. Door and partition detailing does that work.
- Footwear and leather units
Machinery and presses running long shifts close to occupied areas. Enclosure at the source rather than lining the hall.
- Dense old city access
Narrow lanes near the heritage area mean a lorry often cannot reach the door. Tell us and we break the pallets down.
- Next day from the plant
A short run, so freight stays cheap and samples reach you quickly.
- Assembly and performance rooms
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
04 / Room by room
Where the money goes on a Agra project
-
Screen to screen
Independent construction between auditoria, with services broken at the line. Corridor noise and the room next door generate more complaints than room acoustics ever do. Door and partition detailing does that work.
- SoundBlanket mass loaded vinyl, 2100 kg per cubic metre
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- PET felt acoustic panels, 4 to 24 mm
-
In room response
Heavy absorption on side and rear walls so the mix is heard as intended. Machinery and presses running long shifts close to occupied areas. Enclosure at the source rather than lining the hall.
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- PET felt acoustic panels, 1220 x 2440 mm standard, 4 x 8 ft
-
Plant and projection
Equipment noise into the auditorium, treated at source. Narrow lanes near the heritage area mean a lorry often cannot reach the door. Tell us and we break the pallets down.
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Acoustic panels, ASTM C423
- PET felt acoustic panels, 2440 x 4270 mm, 2.44 x 4.27 m, 8 x 14 ft
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Climate and durability
Why the climate in Agra changes the material, not the target
Agra is hot summers, mild winters and a distinct wet season, and that narrows the material list before acoustics is discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The failure we design against here is wet-season humidity behind linings.
On a Agra job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Worth knowing
What we watch go wrong on jobs like this
-
A shared service void running across the wall line
Square metre for square metre the ceiling is the cheapest result in the room. Skipping it and buying wall panels instead is the most common way to overspend.
-
Treating the auditorium to fix bleed from the next screen
It sounds like a small detail until the room is finished and the complaint arrives.
-
Doors and lobbies specified late and undersized
A 6 mm undercut under a door leaves a hole the size of a brick. The wall around it is then decorative.
-
Treating it as a generic Agra job
Corridor noise and the room next door generate more complaints than room acoustics ever do. Door and partition detailing does that work.
05 / Supply
How material reaches a Agra site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | next day |
| Dispatch | 2 to 4 working days |
| To site | next day |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly one hundred and eighty kilometres, normally next day on a dedicated truck.
Questions from Agra projects
What makes cinema and multiplex soundproofing different in Agra?
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night. Corridor noise and the room next door generate more complaints than room acoustics ever do. Door and partition detailing does that work.
Where should the budget go first on a Agra project?
Screen to screen. Independent construction between auditoria, with services broken at the line. In room response. Heavy absorption on side and rear walls so the mix is heard as intended.
Do you have an office or installation team in Agra?
No. We manufacture in India and supply into Agra. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Agra site?
made at: Our own plant, Palwal, Haryana, reaches site in: next day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
A shared service void running across the wall line. Treating the auditorium to fix bleed from the next screen.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.