Manufactured in India, supplied in Tirupati
Soundproofing materials in Tirupati
We manufacture soundproofing materials at our own plant at Palwal in Haryana, India, and supply them into Tirupati. Tirupati handles crowds at a scale almost nowhere else does, and that changes what a hall, a queue complex and a guest room have to do.
- SoundBlanket MLV
- 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
- BassBloc
- 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Principle
- Mass, then decoupling, then cavity absorption, then sealing
- Test standards
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Lead time
- 4 to 7 working days for stock items
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / What it is
The material, and what it actually does on a Tirupati job
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. This is the page for someone whose problem is noise getting through, not a room that sounds wrong.
Work reaching us from Tirupati is mostly queue and assembly complexes, dining halls, guest accommodation, hotels, hospitals, offices.
RC frame houses and apartments with hard floors, in towns where units share walls and slabs.
- Independent leaf A second wall that does not touch the first. Nothing else comes close for the money.
- Resilient bar Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
- Floating floor Resilient layer and deck, to break impact energy before it reaches the structure.
- What it will not do Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our soundproofing materials are on the main product page. This page covers what that means for a project in Tirupati.
SoundBlanket mass loaded vinyl BassBloc sound absorber Wall soundproofing systems
02 / Specification
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Light retrofit2.5 mm membrane. Where depth is not available
- Standard partition4 mm membrane on an independent leaf. The common specification
- Heavy6 mm membrane and full decoupling. Plant, machine enclosure, low frequency
| SoundBlanket MLV | 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6 |
|---|---|
| BassBloc | 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85 |
| Principle | Mass, then decoupling, then cavity absorption, then sealing |
| Test standards | ASTM E90 for the barrier, ASTM C423 for the absorber |
On a Tirupati job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What the buildings in Tirupati do to the specification
- Designed for continuous crowds
Rooms occupied at capacity around the clock. Announcements have to be understood over a crowd, which is an intelligibility problem first.
- Hard masonry everywhere
Stone, tile and concrete with nothing soft in the room, so reverberation is long and speech suffers.
- Accommodation at volume
Guest rooms in blocks where corridor noise and the next room cause the complaints, not the room itself.
- Four to five days by road
A long run, confirmed before dispatch, with samples sent ahead of the order.
- Plant and HVAC
Split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
- The housing stock
RC frame houses and apartments with hard floors, in towns where units share walls and slabs.
For a Tirupati practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Durability
What the Tirupati climate rules in and rules out
Tirupati is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
For a Tirupati interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
Supply into Tirupati, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | four to five days |
| Dispatch | 2 to 4 working days |
| To site | four to five days |
| Packing | Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list. |
| Lead time | 4 to 7 working days for stock items. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty hundred kilometres, normally four to five days on a dedicated truck.
06 / Worth knowing
What we will tell you that a reseller will not
-
The wrong product for the problem
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
A claim of being local to Tirupati
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The product on finished jobs
Tirupati: questions we are actually asked
Are these soundproofing materials made in Tirupati?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Tirupati as the manufacturer rather than through a dealer. Tirupati handles crowds at a scale almost nowhere else does, and that changes what a hall, a queue complex and a guest room have to do. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Tirupati project?
Rooms occupied at capacity around the clock. Announcements have to be understood over a crowd, which is an intelligibility problem first. Stone, tile and concrete with nothing soft in the room, so reverberation is long and speech suffers. Those two things move the build-up far more than the panel figure does.
How does the Tirupati climate affect this product?
Tirupati is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Tirupati site?
made at: Our own plant, Palwal, Haryana, reaches site in: four to five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will soundproofing materials not do?
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
What quantity do we have to order, and in what packaging?
Minimum order is confirmed with the quote. Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list.
Next step
Tell us the room, we will tell you the build-up
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.