Manufactured in India, supplied in Tanzania
Wood wool acoustic panels in Tanzania
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Tanzania. Made at our own plant in India and shipped into Dar es Salaam, a short and frequently served run from western India.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / Start here
What this is, and what it changes in a Tanzania room
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Tanzania is mostly hotels and lodges, offices, places of assembly, schools, hospitals, apartments.
Concrete and block construction with hard floors, in apartment blocks and compounds close to each other.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Tanzania.
02 / Data sheet
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Where a consultant is already engaged on a Tanzania project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / On the ground
What we see driving Tanzania briefs
- Hot and humid on the coast
PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag quickly.
- A short sea leg from India
Western India to Dar es Salaam is one of the quicker runs we operate, which makes modest and repeat consignments practical.
- A gateway, not just a destination
Material often continues inland to neighbouring countries. Tell us if that is happening and we pack for the second leg.
- Lodges and hospitality
Hotel and lodge work where guest room isolation and function space acoustics are the two recurring briefs.
- Assembly and performance rooms
Church buildings, mosques and event halls carry amplified speech and music in hard volumes.
- School and campus buildings
Classrooms are hard and naturally ventilated with large class sizes and open circulation.
For a Tanzania practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate
Why the climate in Tanzania changes the material, not the target
Tanzania is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
For a Tanzania interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Supply
How material reaches a Tanzania site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Dar es Salaam, then road onward |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Dar es Salaam |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Dar es Salaam, then road onward to site or across the border. Air freight for samples.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Tanzania presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Tanzania: questions we are actually asked
Do you manufacture wood wool acoustic panels in Tanzania?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Tanzania as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Dar es Salaam, a short and frequently served run from western India. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Tanzania enquiry?
Western India to Dar es Salaam is one of the quicker runs we operate, which makes modest and repeat consignments practical. Material often continues inland to neighbouring countries. Tell us if that is happening and we pack for the second leg. Those two things move the build-up far more than the panel figure does.
Does Tanzania weather shorten the life of this material?
Tanzania is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How quickly can material reach a site in Tanzania?
ships from: Palwal, Haryana, India, arrives at: Dar es Salaam, then road onward, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are wood wool acoustic panels the wrong purchase?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Is there a minimum order, and how does it arrive?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.