Home > Tanzania > Acoustic carpet and rugs

Acoustic carpet tiles and rugs on a modern floor

Manufactured in India, supplied in Tanzania

Acoustic carpet and rugs in Tanzania

We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Tanzania. Made at our own plant in India and shipped into Dar es Salaam, a short and frequently served run from western India.

Tile size
500 x 500 mm
Thickness
4 mm
Face
High density polyester
Backing
Felt
Pack coverage
64 sq ft per pack
Lead time
4 to 7 working days
Minimum order
From 320 sq ft
  • Made at our own plant, Palwal, Haryana, India
  • One batch across the order, no blending between runs
  • Test reports sent on request, not just quoted

We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.

01 / The product

What this is, and what it changes in a Tanzania room

A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.

Work reaching us from Tanzania is mostly hotels and lodges, offices, places of assembly, schools, hospitals, apartments.

Concrete and block construction with hard floors, in apartment blocks and compounds close to each other.

  • Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
  • Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
  • Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
  • What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Full specification

Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Tanzania.

Acoustic carpets and rugs

02 / Data sheet

The numbers, and they do not move by city

The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.

  • Standard tile4 mm. Offices, classrooms, studios, corridors
Acoustic carpet and rugs: published specification
Tile size500 x 500 mm
Thickness4 mm
FaceHigh density polyester
BackingFelt
Pack coverage64 sq ft per pack
Boxed20 kg, 55 x 55 x 15 cm

Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.

03 / In this market

What we see driving Tanzania briefs

  • Lodges and hospitality

    Hotel and lodge work where guest room isolation and function space acoustics are the two recurring briefs.

  • Hot and humid on the coast

    PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag quickly.

  • A short sea leg from India

    Western India to Dar es Salaam is one of the quicker runs we operate, which makes modest and repeat consignments practical.

  • A gateway, not just a destination

    Material often continues inland to neighbouring countries. Tell us if that is happening and we pack for the second leg.

  • Assembly and performance rooms

    Church buildings, mosques and event halls carry amplified speech and music in hard volumes.

  • The housing stock

    Concrete and block construction with hard floors, in apartment blocks and compounds close to each other.

We would rather argue about the build-up at design stage than on site. See how we support architects.

04 / Conditions

Durability in Tanzania, before acoustics is discussed

Tanzania is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.

Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.

The risk we design against here is mould, sagging fabric finishes and swelling in timber.

Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.

05 / Route to site

Supply into Tanzania, start to site

Supply into Tanzania
Ships fromPalwal, Haryana, India
Arrives atDar es Salaam, then road onward
Dispatch4 to 7 working days
FreightSea via Dar es Salaam
PackingBoxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Lead time4 to 7 working days.

Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

Sea freight into Dar es Salaam, then road onward to site or across the border. Air freight for samples.

The same minimums apply on export.

Minimum order, acoustic carpet and rugs
Carpet tiles320 sq ft, about 30 sq m
Rugs500 sq ft, about 46 sq m

A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.

06 / Worth knowing

The things worth knowing before you place the order

  • The wrong product for the problem

    Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

  • A number chased without a measurement

    If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.

  • Local approvals that nobody actually holds

    We hold no Tanzania certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.

FAQ

Tanzania: questions we are actually asked

Where are the acoustic carpet and rugs you supply to Tanzania actually made?

No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Tanzania as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Dar es Salaam, a short and frequently served run from western India. You buy at factory prices with one consistent batch across the order.

What decides the specification for a Tanzania project?

Western India to Dar es Salaam is one of the quicker runs we operate, which makes modest and repeat consignments practical. Material often continues inland to neighbouring countries. Tell us if that is happening and we pack for the second leg. Those two things move the build-up far more than the panel figure does.

How does the Tanzania climate affect this product?

Tanzania is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.

How quickly can material reach a site in Tanzania?

ships from: Palwal, Haryana, India, arrives at: Dar es Salaam, then road onward, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

What will acoustic carpet and rugs not do?

Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Is there a minimum order, and how does it arrive?

The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.

Next step

Tell us the room, we will tell you the build-up

We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.