For projects in Surat
Hospital and healthcare acoustics in Surat
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed. Heavy industrial plant across the state, so compressors, presses and generator sets sit close to offices and canteens inside the same building.
- Consulting room privacy
- Speech privacy between rooms, which is partition, door and ceiling void work.
- Ward noise floor
- Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
- Cleanability
- Non shedding, non absorbent surfaces that survive a cleaning regime.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The material, and what it actually does on a Surat job
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed.
Heavy industrial plant across the state, so compressors, presses and generator sets sit close to offices and canteens inside the same building.
Work reaching us from Surat is mostly textile and processing units, diamond workshops, offices, showrooms, schools, clinics.
- Looms and processing machinery Continuous high level noise for whole shifts. Enclosure or barrier at the machine is the honest fix, not lining the walls of the hall.
- Cutting and polishing rooms Smaller, high frequency, and right next to people concentrating. Targeted treatment works here where it does not on a loom floor.
- Units beside housing Noise leaving the building matters as much as noise inside it, and they need different treatments.
- Consulting room privacy Speech privacy between rooms, which is partition, door and ceiling void work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for healthcare acoustics are on the main product page. This page covers what that means for a project in Surat.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Surat, heavy industrial plant across the state, so compressors, presses and generator sets sit close to offices and canteens inside the same building.
On a 25 to 50 mm air gap. The same panel on battens. The air gap moves absorption down in frequency at no extra material cost, and is the cheapest improvement available.
-
Layer 2
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Surat, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Surat, large school and college campuses in concrete and tile, with assembly halls and auditoria in constant use.
Wall array. Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
If you are specifying for a Surat project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / In this market
What we see driving Surat briefs
- Looms and processing machinery
Continuous high level noise for whole shifts. Enclosure or barrier at the machine is the honest fix, not lining the walls of the hall.
- Cutting and polishing rooms
Smaller, high frequency, and right next to people concentrating. Targeted treatment works here where it does not on a loom floor.
- Units beside housing
Noise leaving the building matters as much as noise inside it, and they need different treatments.
- Humid and coastal
PET felt does not absorb moisture or feed mould, which matters where mineral products sag within a couple of seasons.
- Plant and HVAC
Heavy industrial plant across the state, so compressors, presses and generator sets sit close to offices and canteens inside the same building.
04 / Room by room
What each space in a Surat project needs
-
Consulting room privacy
Speech privacy between rooms, which is partition, door and ceiling void work. Continuous high level noise for whole shifts. Enclosure or barrier at the machine is the honest fix, not lining the walls of the hall.
- Ceiling baffles and clouds, 100% PET non-woven, the panel family
- Acoustic carpet and rugs, 4 mm
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
-
Ward noise floor
Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling. Smaller, high frequency, and right next to people concentrating. Targeted treatment works here where it does not on a loom floor.
- Ceiling baffles and clouds, 9 to 24 mm
- Acoustic carpet and rugs, High density polyester
- Acoustic panels, ASTM C423
-
Cleanability
Non shedding, non absorbent surfaces that survive a cleaning regime. Noise leaving the building matters as much as noise inside it, and they need different treatments.
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- Acoustic carpet and rugs, Felt
- Acoustic panels, 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
04 / Climate and durability
Durability in Surat, before acoustics is discussed
Surat is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
06 / Read this first
The six errors that cost the most
-
Fabric wrapped products in a clinical area
Plant noise treated as a room problem is the most reliable way to spend a budget and change nothing anyone can hear.
-
Absorption used where privacy was the requirement
If the complaint is being overheard, no amount of absorption inside the room will fix it. That is a partition job and we will say so.
-
Ceiling void left open above a partition
A treated wall under a bare hard ceiling gives you a fraction of the reduction you paid for, and the room still sounds wrong.
-
Treating it as a generic Surat job
Continuous high level noise for whole shifts. Enclosure or barrier at the machine is the honest fix, not lining the walls of the hall.
05 / Getting it there
What the route into Surat actually looks like
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | two to three days |
| Dispatch | 2 to 4 working days |
| To site | two to three days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly eleven hundred kilometres, normally two to three days on a dedicated truck.
Questions from Surat projects
What makes hospital and healthcare acoustics different in Surat?
Heavy industrial plant across the state, so compressors, presses and generator sets sit close to offices and canteens inside the same building. Continuous high level noise for whole shifts. Enclosure or barrier at the machine is the honest fix, not lining the walls of the hall.
Where should the budget go first on a Surat project?
Consulting room privacy. Speech privacy between rooms, which is partition, door and ceiling void work. Ward noise floor. Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
Do you have an office or installation team in Surat?
No. We manufacture in India and supply into Surat. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Surat site?
made at: Our own plant, Palwal, Haryana, reaches site in: two to three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Fabric wrapped products in a clinical area. Absorption used where privacy was the requirement.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.