Manufactured in India, supplied in Spain
Acoustic panels in Spain
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Spain. Made at our own plant in India and shipped into Valencia, Barcelona or Algeciras, which keeps the inland leg short for most of the country.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The product
What this material is and where it earns its place in Spain
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Spain is mostly hotels and resorts, restaurants, apartments, offices, schools, clinics, studios.
The Ensanche and equivalent city blocks stack flats around a patio with shared walls and slabs. Footfall and speech move between homes, which is a mass and isolation problem.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Spain.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Spain job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
What we see driving Spain briefs
- Sealed, air-conditioned rooms
Once a room is closed up against the heat it stops leaking sound outward and starts building it up inside. Absorption has to be balanced, not maximised.
- Tile and terrazzo everywhere
Hard floors and rendered walls are the standard build. They reflect almost everything, so absorption on the ceiling usually does more than anything you add at eye level.
- Season deadlines are real deadlines
Coastal and resort work has to be finished before the season opens. We give honest dispatch and transit windows rather than optimistic ones, so the fit-out is not waiting on a container.
- Late hours, homes above
Bars and restaurants run late underneath apartments. The complaint is almost always low frequency and footfall, which means mass and isolation, not foam.
- School and campus buildings
School buildings are concrete and tile with high ceilings and hard floors, and dining halls are the loudest rooms in the building.
- The studio and content scene
Studios sit inside residential blocks, so the neighbour above matters more than the room treatment.
If you are specifying for a Spain project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
What the Spain climate rules in and rules out
Spain is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
How material reaches a Spain site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Valencia, Barcelona or Algeciras, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Valencia |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
Sea freight into Valencia, Barcelona or Algeciras, then road to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
Four honest warnings before you buy
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Spain presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
The material in real interiors
Spain: questions we are actually asked
Where are the acoustic panels you supply to Spain actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Spain as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Valencia, Barcelona or Algeciras, which keeps the inland leg short for most of the country. You buy at factory prices with one consistent batch across the order.
Why would a Spain build-up differ from anywhere else?
Hard floors and rendered walls are the standard build. They reflect almost everything, so absorption on the ceiling usually does more than anything you add at eye level. Coastal and resort work has to be finished before the season opens. We give honest dispatch and transit windows rather than optimistic ones, so the fit-out is not waiting on a container. Those two things move the build-up far more than the panel figure does.
How does the Spain climate affect this product?
Spain is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
When would material land on a Spain site?
ships from: Palwal, Haryana, India, arrives at: Valencia, Barcelona or Algeciras, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order.
When are acoustic panels the wrong purchase?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
How is the order packed and what is the minimum?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.