Manufactured in India, supplied in Singapore
Acoustic foam and BassBloc in Singapore
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Singapore. Made at our own plant in India and shipped straight into Singapore, one of the shortest and most frequently served runs we operate.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The material
What you are buying, and what it fixes in Singapore
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Singapore is mostly apartments and condominiums, offices, hotels, schools, hospitals, studios.
HDB and condominium towers in reinforced concrete with hard floors. Mass is good, impact noise through the slab and live rooms are the complaints.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Singapore.
02 / Data sheet
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
On a Singapore job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / On the ground
What decides the build-up in Singapore
- A very short sea leg
Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical.
- Concrete towers, live interiors
The structure blocks well. The problem is tile, glass and stone inside, plus impact passing down through slabs.
- Tropical humidity all year
PET felt does not absorb moisture, shed fibre or feed mould, which matters where mineral products sag within a couple of seasons.
- Everything is documented
Send the specification and we will tell you in writing where our material sits against it, and where it does not.
- The housing stock
HDB and condominium towers in reinforced concrete with hard floors. Mass is good, impact noise through the slab and live rooms are the complaints.
- The studio and content scene
Studios go into industrial and commercial units where the neighbouring tenancy and the building plant set the floor.
For a Singapore practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate
Why the climate in Singapore changes the material, not the target
Singapore is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Route to site
What the route into Singapore actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Singapore, then a short road run to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea into Singapore |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight direct into Singapore, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Singapore presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
The material in real interiors
Singapore: questions we are actually asked
Is there a Singapore factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Singapore as the manufacturer rather than through a dealer. Made at our own plant in India and shipped straight into Singapore, one of the shortest and most frequently served runs we operate. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Singapore project?
Western India to Singapore is quick and frequently served, which makes modest and repeat consignments genuinely practical. The structure blocks well. The problem is tile, glass and stone inside, plus impact passing down through slabs. Those two things move the build-up far more than the panel figure does.
Does Singapore weather shorten the life of this material?
Singapore is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Singapore?
ships from: Palwal, Haryana, India, arrives at: Singapore, then a short road run to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic foam and BassBloc for?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
Is there a minimum order, and how does it arrive?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send a plan and a section, get a real build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.