Manufactured in India, supplied in Silchar
Acoustic carpet and rugs in Silchar
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Silchar. Silchar is remote, humid and reached by a long road, so the honest thing is to plan the delivery properly and pack for the journey.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The product
What this material is and where it earns its place in Silchar
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from Silchar is mostly colleges and schools, hospitals, government buildings, hotels, assembly halls, offices.
RC frame and timber construction with hard floors, built for very heavy rainfall and high humidity year round.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Silchar.
02 / Specification
The published figures, unchanged by location
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What we see driving Silchar briefs
- High humidity most of the year
PET felt does not hold moisture or feed mould, which matters where mineral products sag within a couple of seasons.
- A long route, planned properly
Five days and a hill leg at the end. We brace and wrap for the journey and confirm dates before dispatch.
- Institutional rooms
Lecture halls and assembly spaces in concrete and tile that defeat the speaker.
- Seismic zone
Buildings are designed to move, so a build-up must not stiffen across a movement joint.
- Assembly and performance rooms
Auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
- The housing stock
RC frame and timber construction with hard floors, built for very heavy rainfall and high humidity year round.
Architects working in Silchar usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate and durability
The Silchar climate decides the material list
Silchar is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
Supply into Silchar, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five days |
| Dispatch | 2 to 4 working days |
| To site | five days |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty one hundred kilometres, normally five days on a dedicated truck. The last leg is hill road and we plan for it.
320 sq ft for carpet tiles, 500 sq ft for rugs.
| Carpet tiles | 320 sq ft, about 30 sq m, 5 packs |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Silchar
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Silchar: questions we are actually asked
Do you manufacture acoustic carpet and rugs in Silchar?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Silchar as the manufacturer rather than through a dealer. Silchar is remote, humid and reached by a long road, so the honest thing is to plan the delivery properly and pack for the journey. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Silchar job?
Five days and a hill leg at the end. We brace and wrap for the journey and confirm dates before dispatch. PET felt does not hold moisture or feed mould, which matters where mineral products sag within a couple of seasons. Those two things move the build-up far more than the panel figure does.
How does the Silchar climate affect this product?
Silchar is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Silchar?
made at: Our own plant, Palwal, Haryana, reaches site in: five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy acoustic carpet and rugs for?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
What is the minimum order and how is it packed?
320 sq ft for carpet tiles, 500 sq ft for rugs. Carpet tiles, 320 sq ft, about 30 sq m, 5 packs. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.