Manufactured in India, supplied in Serbia
Acoustic panels in Serbia
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Serbia. Made at our own plant in India and shipped into Thessaloniki or Koper, then road across a border into Serbia.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / The product
What you are buying, and what it fixes in Serbia
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Serbia is mostly manufacturing plants, offices and service centres, panel block housing, hotels, schools, hospitals.
Panel and concrete blocks with hard floors alongside older masonry stock with timber floors.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Serbia.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification
Published specification, identical wherever we ship it
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
On a Serbia job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / In this market
What the buildings in Serbia do to the specification
- Belgrade conversions
Older buildings turned into offices and hospitality, with tall rooms and hard plaster that hold sound too long.
- Landlocked, through a neighbour
Two ports to choose from and a border to cross. We quote each leg separately so the programme runs on real dates.
- Manufacturing and plant
Continuous machine noise where enclosure and mass do the work rather than absorption on a wall.
- Panel block housing
Prefabricated concrete blocks pass speech and footfall between flats. Surface treatment does nothing here.
- School and campus buildings
School buildings are hard surfaced with long corridors and gymnasiums doubling as halls.
- The studio and content scene
A strong music and production culture working inside converted buildings with good mass.
Architects working in Serbia usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Climate
What the Serbia climate rules in and rules out
Serbia is cold winters and warm summers, with a wide annual temperature range, and that narrows the sensible material list before acoustics is even discussed.
A wide annual swing stresses adhesive fixings and moves timber. Mechanical fixing beats adhesive alone, and PET felt is stable across the range.
The risk we design against here is adhesive failure and timber movement across the annual swing.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
Getting it to Serbia, with real dates
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Thessaloniki or Koper, then road across the border |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Thessaloniki or Koper, then road |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Thessaloniki or Koper, then road across the border. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Before you buy
Where this goes wrong, said plainly
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Local approvals that nobody actually holds
We hold no Serbia certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
07 / In projects
The product on finished jobs
Serbia: questions we are actually asked
Where are the acoustic panels you supply to Serbia actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Serbia as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Thessaloniki or Koper, then road across a border into Serbia. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Serbia project?
Two ports to choose from and a border to cross. We quote each leg separately so the programme runs on real dates. Continuous machine noise where enclosure and mass do the work rather than absorption on a wall. Those two things move the build-up far more than the panel figure does.
How does the Serbia climate affect this product?
Serbia is cold winters and warm summers, with a wide annual temperature range. A wide annual swing stresses adhesive fixings and moves timber. Mechanical fixing beats adhesive alone, and PET felt is stable across the range. The failure we design against here is adhesive failure and timber movement across the annual swing.
How quickly can material reach a site in Serbia?
ships from: Palwal, Haryana, India, arrives at: Thessaloniki or Koper, then road across the border, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic panels not do?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What is the minimum order and how is it packed?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.