Home > Seoul > Acoustic carpet and rugs

Acoustic carpet tiles and rugs on a modern floor

Manufactured in India, supplied in Seoul

Acoustic carpet and rugs in Seoul

We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into Seoul. Made at our own plant in India and shipped into Incheon, close to the city, so the road leg after the port is short.

Tile size
500 x 500 mm
Thickness
4 mm
Face
High density polyester
Backing
Felt
Pack coverage
64 sq ft per pack
Lead time
4 to 7 working days
Minimum order
From 320 sq ft
  • Made at our own plant, Palwal, Haryana, India
  • One batch across the order, no blending between runs
  • Test reports sent on request, not just quoted

We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.

01 / The material

What this is, and what it changes in a Seoul room

A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.

Work reaching us from Seoul is mostly apartment towers, offices, studios and content rooms, cafes and dining, clinics, schools.

Reinforced concrete apartment towers with underfloor heating and hard floors. Impact noise between floors is the single biggest residential complaint.

  • Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
  • Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
  • Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
  • What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

Full specification

Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in Seoul.

Acoustic carpets and rugs

02 / The numbers

Published specification, identical wherever we ship it

We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.

  • Standard tile4 mm. Offices, classrooms, studios, corridors
Acoustic carpet and rugs: published specification
Tile size500 x 500 mm
Thickness4 mm
FaceHigh density polyester
BackingFelt
Pack coverage64 sq ft per pack
Boxed20 kg, 55 x 55 x 15 cm

If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.

03 / In this market

What decides the build-up in Seoul

  • Content rooms everywhere

    Studios, streaming rooms and practice spaces inside residential and commercial towers. Isolation from the building is what makes them usable.

  • It is the floor, not the wall

    Impact noise from above dominates complaints in this city. The fix goes under the finish before the finish goes down, not on the ceiling afterwards.

  • Dense, vertical, mixed use

    Cafes and venues sit underneath homes in the same structure, so containment decides trading hours.

  • Incheon is close

    A short road leg after the port keeps landed cost and dates predictable.

  • Assembly and performance rooms

    Church buildings, halls and auditoria are large hard volumes carrying amplified speech and music.

  • The housing stock

    Reinforced concrete apartment towers with underfloor heating and hard floors. Impact noise between floors is the single biggest residential complaint.

For a Seoul practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.

04 / Climate

What the Seoul climate rules in and rules out

Seoul is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.

PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.

The risk we design against here is wet-season humidity behind linings.

Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.

05 / Supply

What the route into Seoul actually looks like

Supply into Seoul
Ships fromPalwal, Haryana, India
Arrives atIncheon, then a short road run into Seoul
Dispatch4 to 7 working days
FreightSea via Incheon
PackingBoxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Lead time4 to 7 working days.

Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

Sea freight into Incheon, then a short road run into Seoul. Air freight for samples and urgent quantities.

The same minimums apply on export.

Minimum order, acoustic carpet and rugs
Carpet tiles320 sq ft, about 30 sq m
Rugs500 sq ft, about 46 sq m

A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.

06 / Read this first

Four honest warnings before you buy

  • The wrong product for the problem

    Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

  • Coverage bought instead of a target

    Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.

  • A claim of being local to Seoul

    We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.

FAQ

Seoul: questions we are actually asked

Do you manufacture acoustic carpet and rugs in Seoul?

No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Seoul as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Incheon, close to the city, so the road leg after the port is short. You buy at factory prices with one consistent batch across the order.

What do you look at first on a Seoul enquiry?

Impact noise from above dominates complaints in this city. The fix goes under the finish before the finish goes down, not on the ceiling afterwards. Studios, streaming rooms and practice spaces inside residential and commercial towers. Isolation from the building is what makes them usable. Those two things move the build-up far more than the panel figure does.

Is this the right material for Seoul conditions?

Seoul is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.

What is the delivery time into Seoul?

ships from: Palwal, Haryana, India, arrives at: Incheon, then a short road run into Seoul, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.

Where do acoustic carpet and rugs fail to help?

Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.

What quantity do we have to order, and in what packaging?

The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.

Next step

Tell us the room, we will tell you the build-up

One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.