Home > San Francisco > Acoustic carpet and rugs
Manufactured in India, supplied in San Francisco
Acoustic carpet and rugs in San Francisco
We manufacture acoustic carpet and rugs at our own plant at Palwal in Haryana, India, and supply them into San Francisco. Made at our own plant in India and shipped into Oakland, across the bay, so the road leg to site is short.
- Tile size
- 500 x 500 mm
- Thickness
- 4 mm
- Face
- High density polyester
- Backing
- Felt
- Pack coverage
- 64 sq ft per pack
- Lead time
- 4 to 7 working days
- Minimum order
- From 320 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a San Francisco job
A tile carpet with a dense polyester face on a felt backing. It absorbs at the floor and, more usefully, kills footfall and chair scrape at the point they are generated.
Work reaching us from San Francisco is mostly victorian conversions, tech offices, apartments, studios, restaurants, clinics.
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
- Loose lay on tackifier Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
- Over a resilient underlay Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
- Zoned Carpet in the circulation and meeting zones, hard floor elsewhere, so the treatment sits where the noise is made.
- What it will not do Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic carpet and rugs are on the main product page. This page covers what that means for a project in San Francisco.
02 / Specification
The numbers, and they do not move by city
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Standard tile4 mm. Offices, classrooms, studios, corridors
| Tile size | 500 x 500 mm |
|---|---|
| Thickness | 4 mm |
| Face | High density polyester |
| Backing | Felt |
| Pack coverage | 64 sq ft per pack |
| Boxed | 20 kg, 55 x 55 x 15 cm |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / On the ground
What we see driving San Francisco briefs
- Timber Victorians
Light framed, over a century old, and divided into flats. Low frequency passes easily and footfall travels straight down.
- Depth costs real money
At local rates a wall growing into the room is a significant number. A dense thin membrane usually beats a thicker framed build-up on total cost.
- Designed to move
Seismic detailing requires junctions that stay flexible, so the acoustic layer must not stiffen across them.
- Oakland is close
A short road leg after the port keeps landed cost and timing predictable.
- Assembly and performance rooms
Churches, school gyms and multipurpose halls double as performance spaces, which means a room designed for neither speech nor music has to carry both.
- The housing stock
American homes are timber frame with gypsum board on both faces, so a party wall or a basement ceiling has almost no mass. Adding a second leaf with a limp membrane between does more than any amount of surface treatment.
Architects working in San Francisco usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
Why the climate in San Francisco changes the material, not the target
San Francisco is mild summers and cold, wet winters, and that narrows the sensible material list before acoustics is even discussed.
Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air.
The risk we design against here is condensation and cold bridging behind new linings.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
Supply into San Francisco, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Oakland, then a short road run across the bay |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Oakland |
| Packing | Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Oakland, then a short road run to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Carpet tiles | 320 sq ft, about 30 sq m |
|---|---|
| Rugs | 500 sq ft, about 46 sq m |
A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a San Francisco presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
San Francisco: questions we are actually asked
Is there a San Francisco factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into San Francisco as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Oakland, across the bay, so the road leg to site is short. You buy at factory prices with one consistent batch across the order.
What changes the specification on a San Francisco job?
Light framed, over a century old, and divided into flats. Low frequency passes easily and footfall travels straight down. At local rates a wall growing into the room is a significant number. A dense thin membrane usually beats a thicker framed build-up on total cost. Those two things move the build-up far more than the panel figure does.
Does San Francisco weather shorten the life of this material?
San Francisco is mild summers and cold, wet winters. Cold external walls and long heating seasons make condensation behind a lining the thing to design out. PET felt is unaffected by damp air. The failure we design against here is condensation and cold bridging behind new linings.
How quickly can material reach a site in San Francisco?
ships from: Palwal, Haryana, India, arrives at: Oakland, then a short road run across the bay, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
When are acoustic carpet and rugs the wrong purchase?
Carpet fixes footfall and chair noise and takes the edge off a live room. It will not deliver a reverberation target on its own, because the ceiling is almost always the bigger surface.
What is the minimum order and how is it packed?
The same minimums apply on export. Carpet tiles, 320 sq ft, about 30 sq m. Rugs, 500 sq ft, about 46 sq m. A pack of tiles covers 64 sq ft and weighs 20 kg boxed, so the tile minimum is exactly five packs and about 100 kg. Boxed, 64 sq ft per pack, 20 kg. Easy to carry up a stair, which matters on fit-out sites with no lift access.
Next step
Send a plan and a section, get a real build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.