Manufactured in India, supplied in Salem
Wooden slat acoustic panels in Salem
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Salem. Salem is steel and textiles in dry inland heat, so most of what we supply goes into working plant rather than interiors.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / Start here
The material, and what it actually does on a Salem job
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Salem is mostly steel and textile plant, workshops, offices, canteens, colleges, hospitals.
RC frame houses and apartments with hard floors, built for heat and humidity with open plan layouts that carry sound room to room.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Salem.
02 / Specification sheet
Published specification, identical wherever we ship it
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
On a Salem job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
03 / Local conditions
What decides the build-up in Salem
- Plant noise is a mass problem
Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them.
- Hot buildings
PET felt does not sag, shed fibre or degrade at high temperature, which matters in a roof void above a hot process.
- Intelligibility on the floor
Large sheds where instructions and alarms have to be understood. Targeted absorption fixes that without touching the machines.
- Five days by road
A long run, confirmed before dispatch, with samples sent ahead.
- Assembly and performance rooms
Kalyana mandapams, temple halls and auditoria are very large hard volumes carrying amplified speech and music.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate and durability
Durability in Salem, before acoustics is discussed
Salem is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Logistics
Getting it to Salem, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five days |
| Dispatch | 2 to 4 working days |
| To site | five days |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty three hundred kilometres, normally five days on a dedicated truck.
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Salem
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
Salem: questions we are actually asked
Do you manufacture wooden slat acoustic panels in Salem?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Salem as the manufacturer rather than through a dealer. Salem is steel and textiles in dry inland heat, so most of what we supply goes into working plant rather than interiors. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Salem job?
Mills, compressors and processing machinery are low frequency and structure-borne. Panels on a wall will not touch them. PET felt does not sag, shed fibre or degrade at high temperature, which matters in a roof void above a hot process. Those two things move the build-up far more than the panel figure does.
Is this the right material for Salem conditions?
Salem is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Salem?
made at: Our own plant, Palwal, Haryana, reaches site in: five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are wooden slat acoustic panels the wrong purchase?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
What is the minimum order and how is it packed?
500 sq ft, about 46 sq m, whatever the substrate, pattern, width or thickness. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Send the drawings, get a straight answer
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.