Manufactured in India, supplied in Rourkela
Ceiling baffles and clouds in Rourkela
We manufacture ceiling baffles and clouds at our own plant at Palwal in Haryana, India, and supply them into Rourkela. Rourkela is a steel township, which means heavy plant and the company housing and institutions built around it.
- Material
- 100% PET non-woven, the panel family
- Thickness
- 9 to 24 mm
- Size
- Made to the drawing, standard and custom
- Exposure
- Both faces work, which is why suspended area outperforms the same area laid flat
- Test standard
- ASTM C423
- Lead time
- Confirmed against the drawing
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The material
What you are buying, and what it fixes in Rourkela
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. It is how you treat a room with exposed services, where there is no ceiling to line.
Work reaching us from Rourkela is mostly steel plant and heavy engineering, control rooms, township housing, schools, hospitals, offices.
RC frame apartments and houses with hard floors, built for heat and heavy monsoon along a cyclone exposed coast.
- Vertical baffles Hung on edge in rows. Both faces absorb, so coverage figures based on plan area understate them.
- Horizontal clouds Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
- Mixed with services Set out around ducts, trays and lighting rather than fighting them, coordinated from your reflected ceiling plan.
- What it will not do Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for baffles and clouds are on the main product page. This page covers what that means for a project in Rourkela.
Acoustic ceiling baffles Acoustic ceiling clouds Acoustic ceiling tiles
02 / Data sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. Offices, retail, general
- EchoPro 181800 GSM. Halls, atria, spaces with a target
- EchoMax 222200 GSM. High volume and high occupancy
| Material | 100% PET non-woven, the panel family |
|---|---|
| Thickness | 9 to 24 mm |
| Size | Made to the drawing, standard and custom |
| Exposure | Both faces work, which is why suspended area outperforms the same area laid flat |
| Test standard | ASTM C423 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What we see driving Rourkela briefs
- Heavy industry, low frequency
Mills, blowers and compressors put energy into the structure. Mass, isolation and enclosure are the only things that touch it.
- Control rooms
Operators listening to alarms and radios for long shifts need intelligibility and a low background before anything else.
- Township housing
Older township stock with thin separating walls. Adding mass is the reliable fix for noise between homes.
- Three days by road
A dedicated truck from Palwal, with samples sent ahead so the specification is settled before dispatch.
- School and campus buildings
New university and school campuses in concrete and tile, with lecture halls and hostels repeating the same detail.
For a Rourkela practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate
The Rourkela climate decides the material list
Rourkela is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Supply
Getting it to Rourkela, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three days |
| Dispatch | 2 to 4 working days |
| To site | three days |
| Packing | Flat packed with fixings, sets labelled by row so the install sequence matches the drawing. |
| Lead time | Confirmed against the drawing. Standard sizes 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly thirteen hundred kilometres, normally three days on a dedicated truck.
500 sq ft, about 46 sq m, across baffles and clouds together.
| Baffles and clouds | 500 sq ft, about 46 sq m |
|---|
Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does.
06 / Read this first
Where this goes wrong, said plainly
-
The wrong product for the problem
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
Suppliers who imply a Rourkela presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Rourkela: questions we are actually asked
Do you manufacture ceiling baffles and clouds in Rourkela?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Rourkela as the manufacturer rather than through a dealer. Rourkela is a steel township, which means heavy plant and the company housing and institutions built around it. You buy at factory prices with one consistent batch across the order.
Why would a Rourkela build-up differ from anywhere else?
Mills, blowers and compressors put energy into the structure. Mass, isolation and enclosure are the only things that touch it. Operators listening to alarms and radios for long shifts need intelligibility and a low background before anything else. Those two things move the build-up far more than the panel figure does.
Will this material last in the Rourkela climate?
Rourkela is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
When would material land on a Rourkela site?
made at: Our own plant, Palwal, Haryana, reaches site in: three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are ceiling baffles and clouds the wrong purchase?
Baffles are efficient, not magic. In a very tall volume the height above the baffle line still rings, and the honest answer is either more area or accepting a higher RT, not a denser panel.
What quantity do we have to order, and in what packaging?
500 sq ft, about 46 sq m, across baffles and clouds together. Baffles and clouds, 500 sq ft, about 46 sq m. Baffles and clouds are cut to the drawing, so the minimum is counted on finished panel area. Both faces of a hung baffle absorb, which is why coverage taken off a plan understates what the order actually does. Flat packed with fixings, sets labelled by row so the install sequence matches the drawing.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.