For projects in Riyadh
Office acoustics and soundproofing in Riyadh
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted. Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
- Open plan
- Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
- Meeting rooms
- Privacy between rooms. That is partition and door work, not panels.
- Cabins and calls
- Short RT so a call sounds clean. A small amount of well placed absorber.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this is, and what it changes in a Riyadh room
Three separate problems get called one problem: speech carrying across an open floor, meeting rooms that leak, and hard rooms that ring. Each has a different answer and mixing them up is how budgets get wasted.
Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
Work reaching us from Riyadh is mostly government and corporate buildings, hotels, large developments, hospitals, schools, auditoriums.
- Inland, so plan the road leg Dammam then several hundred kilometres by road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- Very large single orders Development-scale work means the same detail repeated across many buildings. Batch consistency matters more than the figure on any one sheet.
- Heat and sealed buildings Closed up with heavy cooling all year. Plant noise has nowhere to escape and rooms stay hard and live inside.
- Open plan Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for office acoustics are on the main product page. This page covers what that means for a project in Riyadh.
Office and conference room acoustics Acoustic office screens
02 / The build-up
The stack, in the order it is installed
-
Layer 1
Ceiling baffles and clouds
PET felt suspended from the soffit, vertically as baffles or horizontally as clouds. In Riyadh, cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
Horizontal clouds. Flat rafts over the occupied zone, which also reflect early speech energy back down where it helps.
-
Layer 2
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Riyadh, mosques, conference halls and hotel ballrooms are tall hard volumes where intelligibility over a long reverberation tail is the whole brief.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Riyadh, new school and university buildings are large, hard and highly glazed. Lecture theatres and sports halls are the spaces that fail first, and ceiling absorption is the practical fix.
Wall array. Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
If you are specifying for a Riyadh project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / On the ground
What the buildings in Riyadh do to the specification
- Inland, so plan the road leg
Dammam then several hundred kilometres by road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- Very large single orders
Development-scale work means the same detail repeated across many buildings. Batch consistency matters more than the figure on any one sheet.
- Heat and sealed buildings
Closed up with heavy cooling all year. Plant noise has nowhere to escape and rooms stay hard and live inside.
- Assembly and briefing spaces
Large halls in concrete and stone where speech stops being intelligible well before the room sounds obviously wrong.
- Plant and HVAC
Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result.
04 / Room by room
Where the money goes on a Riyadh project
-
Open plan
Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Dammam then several hundred kilometres by road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
- Ceiling baffles and clouds, 100% PET non-woven, the panel family
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
-
Meeting rooms
Privacy between rooms. That is partition and door work, not panels. Development-scale work means the same detail repeated across many buildings. Batch consistency matters more than the figure on any one sheet.
- Ceiling baffles and clouds, 9 to 24 mm
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
-
Cabins and calls
Short RT so a call sounds clean. A small amount of well placed absorber. Closed up with heavy cooling all year. Plant noise has nowhere to escape and rooms stay hard and live inside.
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- Acoustic panels, ASTM C423
- SoundBlanket mass loaded vinyl, 5 x 1.2 m, 6 sq m per roll
For a Riyadh interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
04 / Conditions
Why the climate in Riyadh changes the material, not the target
Riyadh is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
On a Riyadh job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Straight talk
What we watch go wrong on jobs like this
-
Lining every wall while leaving the ceiling bare
The ceiling is almost always the largest untreated surface, so leaving it out means paying for panels that cannot reach the target.
-
Treating a privacy problem with absorption
Privacy is a transmission problem. Absorption makes the room sound nicer and does not stop anyone hearing through the wall.
-
Glass cabins specified without a door and head detail
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Treating it as a generic Riyadh job
Dammam then several hundred kilometres by road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
05 / Supply
What the route into Riyadh actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Dammam, then road inland to Riyadh |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Dammam, then road |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Dammam, then road inland to Riyadh. Air freight for samples and urgent quantities.
Questions from Riyadh projects
What makes office acoustics and soundproofing different in Riyadh?
Cooling runs year round at high load, so chillers, AHUs and large duct runs are constant sources. Plant room lining and duct attenuation carry most of the result. Dammam then several hundred kilometres by road. We quote the sea leg and the inland leg separately so the programme runs on real dates.
Where should the budget go first on a Riyadh project?
Open plan. Distraction distance, not reverberation time. Ceiling absorption plus screens at the desk. Meeting rooms. Privacy between rooms. That is partition and door work, not panels.
Do you have an office or installation team in Riyadh?
No. We manufacture in India and supply into Riyadh. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Riyadh site?
ships from: Palwal, Haryana, India, arrives at: Dammam, then road inland to Riyadh, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Lining every wall while leaving the ceiling bare. Treating a privacy problem with absorption.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Tell us the room, we will tell you the build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.