For projects in Raipur
Recording studio acoustics and soundproofing in Raipur
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later. Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
- Isolation
- A measured background level, agreed before anything is bought.
- Low frequency
- Corner and boundary absorption with real depth, not surface foam.
- Early reflections
- Controlled at the mix position, and only there.
- Quote
- From a plan and a section, within 48 hours
01 / The product
What this material is and where it earns its place in Raipur
Two jobs that must not be confused: keeping the building out, and making the room honest inside. The first is mass and decoupling and has to be built first. The second is absorption and diffusion and can be tuned later.
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
Work reaching us from Raipur is mostly steel and power plant, control rooms, government and institutional buildings, colleges, hospitals, hotels.
- Heavy industry, low frequency Mills, blowers and turbines put energy into the structure. Mass, isolation and enclosure are the only things that address it.
- Control rooms run long shifts Operators listening for alarms need a low background before anything else matters.
- New institutional build Large halls and assembly rooms in concrete and tile where speech fails long before the room sounds wrong.
- Isolation A measured background level, agreed before anything is bought.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for studio soundproofing are on the main product page. This page covers what that means for a project in Raipur.
02 / The build-up
The stack, in the order it is installed
-
Layer 1
Acoustic foam and BassBloc
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing. In Raipur, heavy industrial plant, blowers and generator sets close to occupied buildings on the same site.
First reflection points. Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
-
Layer 2
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Raipur, auditoriums, banquet halls and places of worship are large hard volumes in concrete and stone where speech falls apart long before anyone calls the room echoey.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
-
Layer 3
Soundproofing materials
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. In Raipur, classrooms are concrete and tile with bare walls and high ceilings, and class sizes push levels up. Corridors act as reverberation chambers that feed every room off them.
Floating floor. Resilient layer and deck, to break impact energy before it reaches the structure.
If you are specifying for a Raipur project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
03 / In this market
What we see driving Raipur briefs
- Heavy industry, low frequency
Mills, blowers and turbines put energy into the structure. Mass, isolation and enclosure are the only things that address it.
- Control rooms run long shifts
Operators listening for alarms need a low background before anything else matters.
- New institutional build
Large halls and assembly rooms in concrete and tile where speech fails long before the room sounds wrong.
- Three days by road
A dedicated truck from Palwal, confirmed before dispatch, with samples sent ahead.
- The housing stock
RC frame houses and apartments with hard floors, in towns built around steel and power activity.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
04 / Room by room
Room by room, on a typical Raipur job
-
Isolation
A measured background level, agreed before anything is bought. Mills, blowers and turbines put energy into the structure. Mass, isolation and enclosure are the only things that address it.
- Acoustic foam and BassBloc, 1800 x 900 mm
- SoundBlanket mass loaded vinyl, STC 30, 5.25 kg per sq m
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
-
Low frequency
Corner and boundary absorption with real depth, not surface foam. Operators listening for alarms need a low background before anything else matters.
- Acoustic foam and BassBloc, 20 mm
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
- Soundproofing materials, ASTM E90 for the barrier, ASTM C423 for the absorber
-
Early reflections
Controlled at the mix position, and only there. Large halls and assembly rooms in concrete and tile where speech fails long before the room sounds wrong.
- Acoustic foam and BassBloc, 100 kg per cubic metre
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
- Soundproofing materials, 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
04 / Climate
Why the climate in Raipur changes the material, not the target
Raipur is hot summers, mild winters and a distinct wet season, and that narrows the material list before acoustics is discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The failure we design against here is wet-season humidity behind linings.
On a Raipur job with a consultant involved, our part is material that matches the submitted data. See working with acoustic consultants.
06 / Before you buy
What we watch go wrong on jobs like this
-
Buying foam to solve an isolation problem
This is the one that comes back as a second fit-out rather than a snag.
-
Treating the room before the shell is isolated
It sounds like a small detail until the room is finished and the complaint arrives.
-
Killing the room completely and calling it controlled
More absorption is not better absorption. Past the target the room goes flat and people raise their voices to compensate.
-
Treating it as a generic Raipur job
Mills, blowers and turbines put energy into the structure. Mass, isolation and enclosure are the only things that address it.
05 / Getting it there
Supply into Raipur, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | three days |
| Dispatch | 2 to 4 working days |
| To site | three days |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly eleven hundred kilometres, normally three days on a dedicated truck.
Questions from Raipur projects
What makes recording studio acoustics and soundproofing different in Raipur?
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room. Mills, blowers and turbines put energy into the structure. Mass, isolation and enclosure are the only things that address it.
Where should the budget go first on a Raipur project?
Isolation. A measured background level, agreed before anything is bought. Low frequency. Corner and boundary absorption with real depth, not surface foam.
Do you have an office or installation team in Raipur?
No. We manufacture in India and supply into Raipur. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Raipur site?
made at: Our own plant, Palwal, Haryana, reaches site in: three days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Buying foam to solve an isolation problem. Treating the room before the shell is isolated.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.