Manufactured in India, supplied in Portugal
Acoustic panels in Portugal
We manufacture acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Portugal. Made at our own plant in India and shipped into Sines, Lisbon or Leixões, with deep water capacity on the Atlantic coast keeping the sea leg simple.
- Plain PET felt
- 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM
- Printed felt
- 1800 x 900 mm, image printed into the felt rather than onto a facing
- Grooved panels
- Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Test standard
- ASTM C423
- Lead time
- 4 to 7 working days standard
- Minimum order
- From 10 panels
- ASTM C423
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What this material is and where it earns its place in Portugal
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look.
Work reaching us from Portugal is mostly hotel and apartment conversions, restaurants, offices, clinics, schools, studios.
Masonry and concrete blocks with tile and stone floors, in buildings that share walls and courtyards.
- Wall array Panels placed at first reflection points rather than spread evenly. Fewer panels, better result.
- Ceiling first In most rooms the ceiling is the largest untreated surface and the cheapest square metre of result.
- Mixed finish Plain felt where it is out of eye line, printed or grooved where it is seen.
- What it will not do Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our acoustic panel range are on the main product page. This page covers what that means for a project in Portugal.
PET felt acoustic panels Printed acoustic felt panels Grooved PET panels
02 / Specification sheet
The numbers, and they do not move by city
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- EchoCore 151500 GSM. General commercial
- EchoPro 181800 GSM. Rooms with a written RT target
- EchoMax 222200 GSM. High occupancy and high level spaces
| Plain PET felt | 9 to 24 mm, 1220 x 2440 mm standard, up to 2440 x 4270 mm, 1200 to 3600 GSM |
|---|---|
| Printed felt | 1800 x 900 mm, image printed into the felt rather than onto a facing |
| Grooved panels | Cut pattern in PET felt, adds visual rhythm without changing the absorber |
| Test standard | ASTM C423 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / On the ground
What decides the build-up in Portugal
- Conversion, not construction
The structure is staying. Whatever we propose has to work inside the depth and the finishes that are already there, which rules out most thick framed systems.
- Timber floors in old buildings
Footfall passes straight down through the joists. A resilient layer under the new finish does more than anything applied to the ceiling below.
- Atlantic damp
Our PET felt does not absorb moisture, shed fibre or feed mould, which matters on cold external walls in a mild wet climate where mineral products sag.
- Tourism programmes have fixed dates
Hotel openings do not move. We give honest dispatch and transit windows so the fit-out is not waiting on a container.
- School and campus buildings
School buildings are hard surfaced with high ceilings, and canteens are the loudest rooms.
- The studio and content scene
Studios go into converted older buildings with good mass and hard surfaces, often with neighbours above.
For a Portugal practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
Durability in Portugal, before acoustics is discussed
Portugal is hot dry summers and mild wet winters, and that narrows the sensible material list before acoustics is even discussed.
The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing.
The risk we design against here is seasonal movement in timber and winter damp in unheated stock.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
What the route into Portugal actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Sines, Lisbon or Leixões, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Sines or Lisbon |
| Packing | Palletised flat and film wrapped. Printed panels interleaved and corner protected. |
| Lead time | 4 to 7 working days standard. Printed and grooved take longer. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Sines, Lisbon or Leixões, then road to site. Air freight for samples and urgent quantities.
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load.
| Trial order | 200 panels, 6,400 sq ft, mixed thickness, GSM and colour |
|---|---|
| Recommended | Full container |
A panel is 1220 x 2440 mm, which is 32 sq ft.
06 / Read this first
Four honest warnings before you buy
-
The wrong product for the problem
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Portugal
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The material in real interiors
Portugal: questions we are actually asked
Is there a Portugal factory behind this product?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Portugal as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Sines, Lisbon or Leixões, with deep water capacity on the Atlantic coast keeping the sea leg simple. You buy at factory prices with one consistent batch across the order.
Why would a Portugal build-up differ from anywhere else?
The structure is staying. Whatever we propose has to work inside the depth and the finishes that are already there, which rules out most thick framed systems. Footfall passes straight down through the joists. A resilient layer under the new finish does more than anything applied to the ceiling below. Those two things move the build-up far more than the panel figure does.
Will this material last in the Portugal climate?
Portugal is hot dry summers and mild wet winters. The swing between a dry summer and a wet winter moves timber. PET felt is dimensionally stable across that swing; slat panels want a stable substrate and a ventilated fixing. The failure we design against here is seasonal movement in timber and winter damp in unheated stock.
How does an order actually travel to Portugal?
ships from: Palwal, Haryana, India, arrives at: Sines, Lisbon or Leixões, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic panels fail to help?
Coverage is not the target, reverberation time is. Lining every surface wastes money and can leave a room sounding dead and unpleasant. We would rather calculate the area than sell the wall.
What quantity do we have to order, and in what packaging?
200 panels for a trial order, in any mix of thickness, GSM and colour. Beyond a trial we would rather quote a container load. Trial order, 200 panels, 6,400 sq ft, mixed thickness, GSM and colour. Recommended, Full container. A panel is 1220 x 2440 mm, which is 32 sq ft. Palletised flat and film wrapped. Printed panels interleaved and corner protected.
Next step
Tell us the room, we will tell you the build-up
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.