Home > Pondicherry > Wood wool acoustic panels
Manufactured in India, supplied in Pondicherry
Wood wool acoustic panels in Pondicherry
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Pondicherry. Pondicherry is boutique hospitality in heritage buildings on a humid coast, which pushes every solution towards shallow and internal.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / The product
What this material is and where it earns its place in Pondicherry
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Pondicherry is mostly boutique hotels and guest houses, restaurants and cafes, heritage properties, clinics, schools, offices.
Older colonial masonry and newer RC frame construction with tile floors, in a humid coastal climate.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Pondicherry.
02 / Specification sheet
One specification sheet, the same in every market
The specification below is the same everywhere we supply, because a specification that changed by city would not be a specification. What changes is which grade and build-up is the right buy, and that is what the rest of this page is about.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What the buildings in Pondicherry do to the specification
- Coastal humidity
PET felt does not hold moisture or feed mould, which matters where mineral products sag within a couple of seasons.
- Heritage fabric stays
Thick masonry and tall rooms that cannot be altered. Work has to be internal, shallow and ideally reversible.
- Tall rooms, hard finishes
High ceilings with tile and plaster hold sound for a long time, so guests cannot hold a conversation.
- Guest rooms in old buildings
Thick external walls but thin internal partitions, and corridors that carry everything.
- Assembly and performance rooms
Church buildings, auditoria and resort function rooms are hard volumes carrying amplified speech and music.
- School and campus buildings
Classrooms are concrete and tile with bare walls and high ceilings, and class sizes push levels up. Corridors act as reverberation chambers that feed every room off them.
If you are specifying for a Pondicherry project, we can give you a section, a BOQ and the honest limits of each layer. See how we support architects.
04 / Climate
What the Pondicherry climate rules in and rules out
Pondicherry is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Route to site
Getting it to Pondicherry, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | five days |
| Dispatch | 2 to 4 working days |
| To site | five days |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly twenty three hundred kilometres, normally five days on a dedicated truck.
500 sq ft, about 46 sq m.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Before you buy
What we will tell you that a reseller will not
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Pondicherry certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Pondicherry: questions we are actually asked
Where are the wood wool acoustic panels you supply to Pondicherry actually made?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Pondicherry as the manufacturer rather than through a dealer. Pondicherry is boutique hospitality in heritage buildings on a humid coast, which pushes every solution towards shallow and internal. You buy at factory prices with one consistent batch across the order.
Why would a Pondicherry build-up differ from anywhere else?
Thick masonry and tall rooms that cannot be altered. Work has to be internal, shallow and ideally reversible. High ceilings with tile and plaster hold sound for a long time, so guests cannot hold a conversation. Those two things move the build-up far more than the panel figure does.
Is this the right material for Pondicherry conditions?
Pondicherry is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
How does an order actually travel to Pondicherry?
made at: Our own plant, Palwal, Haryana, reaches site in: five days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are wood wool acoustic panels the wrong purchase?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
What quantity do we have to order, and in what packaging?
500 sq ft, about 46 sq m. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send the drawings, get a straight answer
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.