Manufactured in India, supplied in Poland
Wooden slat acoustic panels in Poland
We manufacture wooden slat acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Poland. Made at our own plant in India and shipped into Gdansk or Gdynia, then road inland, which keeps the landed cost competitive against European production.
- Substrate
- MDF, FR MDF, HDF or HDHMR
- Patterns
- 13-3, 14-2, 28-4 and 59-5
- Panel sizes
- 2440 x 192 mm and 2440 x 128 mm
- Thickness
- 14, 16 and 18 mm
- Coverage
- 96 sq ft per unit
- Lead time
- Longer than felt
- Minimum order
- 500 sq ft, about 46 sq m
- EN 13501-1 Class B s1 d0 on FR substrate
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / What it is
The material, and what it actually does on a Poland job
Timber slats on an acoustic backing. The slats are the finish and the rhythm, the backing does the absorbing. Used where the room has to look considered rather than treated.
Work reaching us from Poland is mostly production halls, warehouses, offices, apartments, schools, clinics, hotels.
Panel block housing with concrete walls that carry mass but no impact isolation, alongside new concrete towers with hard finishes.
- Slats on felt backing The standard. Absorption comes from the backing behind the gaps, so the slat gap ratio is an acoustic decision, not only a visual one.
- Slats on a cavity Backing plus an air gap behind moves absorption lower, which matters in music rooms.
- Feature wall only Slats where they are seen, plain felt elsewhere, to hold the budget where it shows.
- What it will not do A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wooden slat panels are on the main product page. This page covers what that means for a project in Poland.
02 / Specification sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- MDFStandard. Dry interiors, general commercial
- FR MDFFire rated. Public buildings and anywhere the specification calls for a class
- HDHMRMoisture resistant. Humid climates and rooms that see damp
| Substrate | MDF, FR MDF, HDF or HDHMR |
|---|---|
| Patterns | 13-3, 14-2, 28-4 and 59-5 |
| Panel sizes | 2440 x 192 mm and 2440 x 128 mm |
| Thickness | 14, 16 and 18 mm |
| Coverage | 96 sq ft per unit |
| Fire class | EN 13501-1 Class B s1 d0 on FR substrate |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / On the ground
The Poland conditions that change the answer
- Quoting against local manufacture
Poland makes a lot of building material itself. We win on container pricing and on being able to answer for what is in the product, not on being cheapest by a margin nobody believes.
- Industrial and logistics buildings
Production halls and warehouses need mass and isolation around plant, and absorption only where speech and alarms have to be understood.
- Panel block housing
Prefabricated concrete blocks pass footfall and speech between flats through thin, well connected elements. Surface treatment will not fix that.
- Direct sea into Gdansk
Containers come straight to the Baltic coast rather than through another country, which shortens the chain and keeps the date reliable.
- Assembly and performance rooms
Church buildings, civic halls and auditoria are hard volumes with long reverberation.
For a Poland practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
The Poland climate decides the material list
Poland is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
Designers get colour, pattern and CNC options with the absorption figure attached to each. See how we work with interior designers.
05 / Logistics
Supply into Poland, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Gdansk or Gdynia, then road inland |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Gdansk |
| Packing | Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry. |
| Lead time | Longer than felt. Confirmed against the pattern and substrate at quote stage. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Gdansk or Gdynia, then road inland. Air freight for samples and urgent quantities.
The same 500 sq ft minimum applies on export.
| Any specification | 500 sq ft, about 46 sq m |
|---|
One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order.
06 / Before you buy
Four honest warnings before you buy
-
The wrong product for the problem
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Local approvals that nobody actually holds
We hold no Poland certification and we will not borrow one. The test data we publish is ours, and we will send the reports rather than describe them.
Poland: questions we are actually asked
Do you manufacture wooden slat acoustic panels in Poland?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Poland as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Gdansk or Gdynia, then road inland, which keeps the landed cost competitive against European production. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Poland project?
Poland makes a lot of building material itself. We win on container pricing and on being able to answer for what is in the product, not on being cheapest by a margin nobody believes. Production halls and warehouses need mass and isolation around plant, and absorption only where speech and alarms have to be understood. Those two things move the build-up far more than the panel figure does.
How does the Poland climate affect this product?
Poland is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How quickly can material reach a site in Poland?
ships from: Palwal, Haryana, India, arrives at: Gdansk or Gdynia, then road inland, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
When are wooden slat acoustic panels the wrong purchase?
A tight slat pattern looks denser but absorbs less, because the open area is what lets sound reach the backing. If the visual you want and the RT target you need pull apart, we will tell you which one the pattern is serving.
How is the order packed and what is the minimum?
The same 500 sq ft minimum applies on export. Any specification, 500 sq ft, about 46 sq m. One unit covers 96 sq ft, so the minimum is a little over five units. Substrate, slat pattern, width and thickness can be mixed inside the same order. Braced crates, slats supported along their length. Timber moves, so crates are kept flat and dry.
Next step
Tell us the room, we will tell you the build-up
Send what you have. We will give you a layer by layer build-up, a bill of quantities and a date material lands, and we will flag anything in the brief that will not achieve what you want.