Home > Philippines > Wood wool acoustic panels
Manufactured in India, supplied in Philippines
Wood wool acoustic panels in Philippines
We manufacture wood wool acoustic panels at our own plant at Palwal in Haryana, India, and supply them into Philippines. Made at our own plant in India and shipped into Manila, Cebu or Batangas, then road or inter-island onward to site.
- Panel size
- 1200 x 600 mm
- Thickness
- 20 mm
- Density
- 400 kg per cubic metre
- NRC
- 0.30
- Test standards
- ASTM C-423 and EN ISO 354
- Lead time
- 4 to 7 working days for standard sizes
- Minimum order
- 500 sq ft, about 46 sq m
- ASTM C-423 and EN ISO 354
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We make this ourselves and ship it to you. No local branch, no borrowed certifications, no dealer margin. One batch across the whole order, and an honest answer when the product is wrong for the problem.
01 / What it is
The product, described honestly, for a Philippines brief
Wood fibre bound into a rigid board with an open texture. Robust, paintable and used where the surface takes knocks, which is why it ends up in schools, sports halls and plant rooms.
Work reaching us from Philippines is mostly service and call centre floors, resorts and hotels, offices, condominiums, schools, hospitals.
Concrete and block construction with hard floors, in condominium towers and low rise housing that share walls and slabs.
- Direct fix Mechanically fixed to the soffit or wall. Durable and simple.
- On a cavity Mounted on battens with an air gap, which is where the low mid performance comes from.
- With a porous backing Board over mineral backing where the room needs more than the board alone gives.
- What it will not do At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for wood wool panels are on the main product page. This page covers what that means for a project in Philippines.
02 / Specification sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Natural20 mm. Plant rooms, back of house, industrial
- Painted20 mm. Classrooms, halls, visible ceilings
| Panel size | 1200 x 600 mm |
|---|---|
| Thickness | 20 mm |
| Density | 400 kg per cubic metre |
| NRC | 0.30 |
| Test standards | ASTM C-423 and EN ISO 354 |
| Surface burning | Class A to ASTM E84 |
Where a consultant is already engaged on a Philippines project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / Local conditions
What we see driving Philippines briefs
- Typhoons and humidity
PET felt does not absorb moisture, rot or feed mould, which matters where mineral products fail within a season.
- An onward leg is normal
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock.
- Service centre floors
Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time.
- Resort work on fixed dates
Island hotel programmes run to an opening. Real dispatch and transit dates matter more than a marginally better price.
- Assembly and performance rooms
Church buildings, gymnasiums and function halls carry amplified speech and music in hard volumes.
- School and campus buildings
Classrooms are hard and naturally ventilated with very large class sizes and open corridors.
We would rather argue about the build-up at design stage than on site. See how we support architects.
04 / Climate
The Philippines climate decides the material list
Philippines is warm and humid through most of the year, with a long wet season, and that narrows the sensible material list before acoustics is even discussed.
Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them.
The risk we design against here is mould, sagging fabric finishes and swelling in timber.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Getting it there
How material reaches a Philippines site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Manila, Cebu or Batangas, then road or inter-island onward |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Manila or Cebu |
| Packing | Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected. |
| Lead time | 4 to 7 working days for standard sizes. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Manila, Cebu or Batangas, then road or inter-island onward. Air freight for samples.
The same 500 sq ft minimum applies on export.
| Any finish | 500 sq ft, about 46 sq m |
|---|
A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels.
06 / Read this first
What we will tell you that a reseller will not
-
The wrong product for the problem
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
Suppliers who imply a Philippines presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
Philippines: questions we are actually asked
Do you manufacture wood wool acoustic panels in Philippines?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Philippines as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Manila, Cebu or Batangas, then road or inter-island onward to site. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Philippines project?
Material often continues by inter-island ferry. Tell us and we brace and wrap for the second journey rather than for a truck dock. Rooms full of simultaneous conversations, where privacy and intelligibility matter more than reverberation time. Those two things move the build-up far more than the panel figure does.
Does Philippines weather shorten the life of this material?
Philippines is warm and humid through most of the year, with a long wet season. Humidity is the deciding factor. PET felt does not absorb moisture, shed fibre or feed mould, which is why it outlasts fabric-wrapped mineral wool in this climate. Wood wool and timber need a ventilated cavity behind them. The failure we design against here is mould, sagging fabric finishes and swelling in timber.
What is the delivery time into Philippines?
ships from: Palwal, Haryana, India, arrives at: Manila, Cebu or Batangas, then road or inter-island onward, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What should you not buy wood wool acoustic panels for?
At 20 mm it is a mid and high frequency absorber, not a bass solution, and painting it heavily will close the surface and reduce what it does. If a room needs low frequency control, depth or a cavity has to come from somewhere.
What is the minimum order and how is it packed?
The same 500 sq ft minimum applies on export. Any finish, 500 sq ft, about 46 sq m. A panel is 1200 x 600 mm, which is 0.72 sq m or about 7.75 sq ft, so the minimum is roughly 65 panels. Palletised flat, edge protected. Boards are rigid but the edges chip, so they travel protected.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.