Manufactured in India, supplied in Patna
Acoustic foam and BassBloc in Patna
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Patna. Patna is building institutional space quickly, and almost all of it involves large rooms where a lot of people need to hear one person.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
This comes from our own plant, not a trading desk. We do not have an office in your city and we will not invent one. What we can give you is factory pricing, consistent material and a technical answer before you commit.
01 / The material
What this is, and what it changes in a Patna room
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Patna is mostly coaching institutes and colleges, hospitals, government buildings, auditoriums, offices, hotels.
RC frame with brick infill and hard floors, in buildings that sit close together on narrow lanes.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Patna.
02 / Data sheet
The published figures, unchanged by location
We publish one data sheet for every market. If a supplier quotes you a different figure for the same product in a different city, one of the two numbers is wrong.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
03 / In this market
What we see driving Patna briefs
- Rooms built for listening
Coaching halls and lecture rooms pack people into hard spaces. Intelligibility fails long before anyone describes the room as echoing.
- New institutional build
Concrete and tile put up quickly, with acoustics discovered at handover. Early drawings are worth more than extra material later.
- Medical privacy
Consult and counselling rooms where conversations have to stay in the room. Partition and door before panel.
- Two days by road
A manageable run, so freight is reasonable and samples arrive before the order is placed.
- The housing stock
RC frame with brick infill and hard floors, in buildings that sit close together on narrow lanes.
- The studio and content scene
Studios go into basements, terrace rooms and back rooms with neighbours on every side and a generator somewhere in the lane. Isolating from the building has to come before treating the room.
For a Patna practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate and durability
What the Patna climate rules in and rules out
Patna is hot summers, mild winters and a distinct wet season, and that narrows the sensible material list before acoustics is even discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The risk we design against here is wet-season humidity behind linings.
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
05 / Route to site
Supply into Patna, start to site
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | two days |
| Dispatch | 2 to 4 working days |
| To site | two days |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
By road from Palwal, roughly ten hundred kilometres, normally two days on a dedicated truck.
200 sq ft for acoustic foam, 300 sq ft for BassBloc, 10 pieces for bass traps.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Worth knowing
Where this goes wrong, said plainly
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
A number chased without a measurement
If nobody has measured the room or set a target, the specification is a guess with a decimal point in it. We will ask for the target before we quote the quantity.
-
A claim of being local to Patna
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
How it looks once it is installed
Patna: questions we are actually asked
Are these acoustic foam and BassBloc made in Patna?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Patna as the manufacturer rather than through a dealer. Patna is building institutional space quickly, and almost all of it involves large rooms where a lot of people need to hear one person. You buy at factory prices with one consistent batch across the order.
What decides the specification for a Patna project?
Coaching halls and lecture rooms pack people into hard spaces. Intelligibility fails long before anyone describes the room as echoing. Concrete and tile put up quickly, with acoustics discovered at handover. Early drawings are worth more than extra material later. Those two things move the build-up far more than the panel figure does.
Is this the right material for Patna conditions?
Patna is hot summers, mild winters and a distinct wet season. PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH. The failure we design against here is wet-season humidity behind linings.
How does an order actually travel to Patna?
made at: Our own plant, Palwal, Haryana, reaches site in: two days, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Where do acoustic foam and BassBloc fail to help?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
How is the order packed and what is the minimum?
200 sq ft for acoustic foam, 300 sq ft for BassBloc, 10 pieces for bass traps. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Send the drawings, get a straight answer
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.