For projects in Oman
Hospital and healthcare acoustics in Oman
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed. Cooling runs year round, so chillers, AHUs and long duct runs are continuous sources rather than seasonal ones.
- Consulting room privacy
- Speech privacy between rooms, which is partition, door and ceiling void work.
- Ward noise floor
- Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
- Cleanability
- Non shedding, non absorbent surfaces that survive a cleaning regime.
- Quote
- From a plan and a section, within 48 hours
01 / What it is
The material, and what it actually does on a Oman job
Two duties at once: privacy where confidential conversations happen, and a lower noise floor where people are trying to rest. Hygiene and cleanability rule out a lot of products before acoustics is even discussed.
Cooling runs year round, so chillers, AHUs and long duct runs are continuous sources rather than seasonal ones.
Work reaching us from Oman is mostly industrial zones and plant, hotels and resorts, institutional buildings, schools, hospitals.
- Three ports, very different road legs Sohar serves the north, Salalah the south and Duqm the industrial centre. We route to whichever shortens the drive to your site.
- Industrial and plant work Process plant, compressors and generator halls where enclosure and mass do the work rather than absorption.
- Heat and sealed buildings Closed up with heavy cooling, so mechanical noise accumulates inside instead of escaping.
- Consulting room privacy Speech privacy between rooms, which is partition, door and ceiling void work.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for healthcare acoustics are on the main product page. This page covers what that means for a project in Oman.
02 / The build-up
What goes where, from the structure in
-
Layer 1
PET felt acoustic panels
A rigid non-woven panel pressed from 100% polyester fibre, a large part of it recycled. In Oman, cooling runs year round, so chillers, AHUs and long duct runs are continuous sources rather than seasonal ones.
Direct to wall. Panel bonded or mechanically fixed flat to the substrate. Simplest, and the weakest at low frequency.
-
Layer 2
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Oman, mosques, hotel ballrooms and conference halls are tall hard volumes where a long tail defeats the speech system.
Over a resilient underlay. Where impact noise to the floor below is the actual complaint, the underlay does that work, not the carpet.
-
Layer 3
Acoustic panels
The full absorber range rather than one product: plain PET felt, printed felt, grooved panels and fabric finishes, chosen by how the room is used and how it has to look. In Oman, school and university buildings are new, large and hard surfaced, with sports halls and lecture rooms failing first.
Mixed finish. Plain felt where it is out of eye line, printed or grooved where it is seen.
For a Oman practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
03 / In this market
What we see driving Oman briefs
- Three ports, very different road legs
Sohar serves the north, Salalah the south and Duqm the industrial centre. We route to whichever shortens the drive to your site.
- Industrial and plant work
Process plant, compressors and generator halls where enclosure and mass do the work rather than absorption.
- Heat and sealed buildings
Closed up with heavy cooling, so mechanical noise accumulates inside instead of escaping.
- A short sea leg from India
Western India to Omani ports is quick, which keeps lead times realistic and repeat orders practical.
- Plant and HVAC
Cooling runs year round, so chillers, AHUs and long duct runs are continuous sources rather than seasonal ones.
04 / Room by room
What each space in a Oman project needs
-
Consulting room privacy
Speech privacy between rooms, which is partition, door and ceiling void work. Sohar serves the north, Salalah the south and Duqm the industrial centre. We route to whichever shortens the drive to your site.
- PET felt acoustic panels, 100% PET non-woven, no added binder
- Ceiling baffles and clouds, 9 to 24 mm
- SoundBlanket mass loaded vinyl, STC 34, 8.4 kg per sq m
-
Ward noise floor
Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling. Process plant, compressors and generator halls where enclosure and mass do the work rather than absorption.
- PET felt acoustic panels, 9, 12, 18 and 24 mm standard, tolerance plus or minus 5 percent
- Ceiling baffles and clouds, Made to the drawing, standard and custom
- SoundBlanket mass loaded vinyl, 12.6 kg per sq m, STC on request
-
Cleanability
Non shedding, non absorbent surfaces that survive a cleaning regime. Closed up with heavy cooling, so mechanical noise accumulates inside instead of escaping.
- PET felt acoustic panels, 4 to 24 mm
- Ceiling baffles and clouds, Both faces work, which is why suspended area outperforms the same area laid flat
- SoundBlanket mass loaded vinyl, 5 x 1.2 m, 6 sq m per roll
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
04 / Conditions
Why the climate in Oman changes the material, not the target
Oman is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the material list before acoustics is discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The failure we design against here is dust ingress and thermal movement in long runs.
Consultants get the raw data, not a sales sheet. That is the whole of our side of the job, and it is set out under working with acoustic consultants.
06 / Worth knowing
Six mistakes that turn into a second fit-out
-
Fabric wrapped products in a clinical area
Plant noise treated as a room problem is the most reliable way to spend a budget and change nothing anyone can hear.
-
Absorption used where privacy was the requirement
If the complaint is being overheard, no amount of absorption inside the room will fix it. That is a partition job and we will say so.
-
Ceiling void left open above a partition
A treated wall under a bare hard ceiling gives you a fraction of the reduction you paid for, and the room still sounds wrong.
-
Treating it as a generic Oman job
Sohar serves the north, Salalah the south and Duqm the industrial centre. We route to whichever shortens the drive to your site.
05 / Logistics
What the route into Oman actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Sohar, Salalah or Duqm, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Sohar, Salalah or Duqm |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Sohar, Salalah or Duqm, then road to site. Air freight for samples and urgent quantities.
Questions from Oman projects
What makes hospital and healthcare acoustics different in Oman?
Cooling runs year round, so chillers, AHUs and long duct runs are continuous sources rather than seasonal ones. Sohar serves the north, Salalah the south and Duqm the industrial centre. We route to whichever shortens the drive to your site.
Where should the budget go first on a Oman project?
Consulting room privacy. Speech privacy between rooms, which is partition, door and ceiling void work. Ward noise floor. Alarms, trolleys and staff conversation in hard corridors. Absorption at the ceiling.
Do you have an office or installation team in Oman?
No. We manufacture in India and supply into Oman. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Oman site?
ships from: Palwal, Haryana, India, arrives at: Sohar, Salalah or Duqm, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Fabric wrapped products in a clinical area. Absorption used where privacy was the requirement.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Drawings in, BOQ and a delivered date out
A plan and a section is enough. We will come back with a build-up, a BOQ and a delivered date, and we will say so if what you are asking for will not work.