Manufactured in India, supplied in Oman
Acoustic foam and BassBloc in Oman
We manufacture acoustic foam and BassBloc at our own plant at Palwal in Haryana, India, and supply them into Oman. Made at our own plant in India and shipped into Sohar, Salalah or Duqm, all short runs from western India, then road to site.
- BassBloc size
- 1800 x 900 mm
- BassBloc thickness
- 20 mm
- BassBloc density
- 100 kg per cubic metre
- Effective range
- 100 to 500 Hz
- BassBloc NRC
- 0.85
- Lead time
- 4 to 7 working days
- Minimum order
- From 200 sq ft
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
- Test reports sent on request, not just quoted
Manufacturer, not reseller. We hold no local approvals and will not imply we do. You get the price the factory quotes, material that matches across a large order, and advice that sometimes talks you out of a purchase.
01 / What it is
The material, and what it actually does on a Oman job
Open cell foam shapes for high frequency control, and BassBloc, a high density absorber built for the low mid range where ordinary foam does nothing.
Work reaching us from Oman is mostly industrial zones and plant, hotels and resorts, institutional buildings, schools, hospitals.
Villas and low rise blocks in concrete and block with stone or tile floors. Mass is present, impact noise between floors and live rooms are not addressed.
- Corner loading Low frequency energy collects in corners, so absorber in the corners does more than the same area spread across a wall.
- First reflection points Mirror trick placement on side walls and ceiling, which is a handful of panels rather than a lined room.
- Behind a fabric frame Where the room has to look finished, absorber inside a frame rather than foam on show.
- What it will not do Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for acoustic foam and bass traps are on the main product page. This page covers what that means for a project in Oman.
02 / Specification sheet
Published specification, identical wherever we ship it
Nothing below changes by location. The decisions that do change are grade, thickness and how the material is mounted, and those are covered further down.
- Foam wedge and pyramidLow density. Flutter and high frequency only
- BassBloc100 kg per cubic metre. Low mid absorption, control rooms, live rooms
| BassBloc size | 1800 x 900 mm |
|---|---|
| BassBloc thickness | 20 mm |
| BassBloc density | 100 kg per cubic metre |
| Effective range | 100 to 500 Hz |
| BassBloc NRC | 0.85 |
Where a consultant is already engaged on a Oman project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
03 / In this market
What the buildings in Oman do to the specification
- Three ports, very different road legs
Sohar serves the north, Salalah the south and Duqm the industrial centre. We route to whichever shortens the drive to your site.
- Industrial and plant work
Process plant, compressors and generator halls where enclosure and mass do the work rather than absorption.
- Heat and sealed buildings
Closed up with heavy cooling, so mechanical noise accumulates inside instead of escaping.
- A short sea leg from India
Western India to Omani ports is quick, which keeps lead times realistic and repeat orders practical.
- The housing stock
Villas and low rise blocks in concrete and block with stone or tile floors. Mass is present, impact noise between floors and live rooms are not addressed.
- The studio and content scene
A small but growing production sector fitting rooms into existing commercial shells where the background noise floor decides the outcome.
For a Oman practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
04 / Climate
The Oman climate decides the material list
Oman is hot and dry for most of the year, with dust and high daytime surface temperatures, and that narrows the sensible material list before acoustics is even discussed.
Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves.
The risk we design against here is dust ingress and thermal movement in long runs.
Interior designers tend to arrive with the look already decided. We will tell you which finish gets there without losing the acoustics. See how we work with interior designers.
05 / Getting it there
Supply into Oman, start to site
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Sohar, Salalah or Duqm, then road to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Sohar, Salalah or Duqm |
| Packing | Compressed and boxed for foam, palletised flat for BassBloc. |
| Lead time | 4 to 7 working days. |
Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
Sea freight into Sohar, Salalah or Duqm, then road to site. Air freight for samples and urgent quantities.
The same minimums apply on export.
| Acoustic foam | 200 sq ft, about 19 sq m |
|---|---|
| BassBloc | 300 sq ft, about 28 sq m |
| Bass traps | 10 pieces |
A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels.
06 / Read this first
The things worth knowing before you place the order
-
The wrong product for the problem
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
-
Coverage bought instead of a target
Lining every surface is a purchase, not a result. We would rather calculate the area against a reverberation target and sell you less of it.
-
A claim of being local to Oman
We manufacture in India and supply here. We do not run an office in this city and we will not pretend to, because you would find out on the first site visit.
07 / In projects
The product on finished jobs
Oman: questions we are actually asked
Do you manufacture acoustic foam and BassBloc in Oman?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Oman as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Sohar, Salalah or Duqm, all short runs from western India, then road to site. You buy at factory prices with one consistent batch across the order.
What changes the specification on a Oman job?
Sohar serves the north, Salalah the south and Duqm the industrial centre. We route to whichever shortens the drive to your site. Process plant, compressors and generator halls where enclosure and mass do the work rather than absorption. Those two things move the build-up far more than the panel figure does.
Does Oman weather shorten the life of this material?
Oman is hot and dry for most of the year, with dust and high daytime surface temperatures. Dust is the enemy of open-cell products. PET felt does not shed, does not hold dust in the way fabric-wrapped glass wool does, and wipes down. Timber needs a stable indoor RH or it moves. The failure we design against here is dust ingress and thermal movement in long runs.
How quickly can material reach a site in Oman?
ships from: Palwal, Haryana, India, arrives at: Sohar, Salalah or Duqm, then road to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. Grooved panels and custom colours take longer, and we say so before you order, not after.
What will acoustic foam and BassBloc not do?
Thin foam on a wall is the most over-sold product in this industry. It controls flutter and nothing below it. If the complaint is boom, bass from a neighbour, or a room that sounds uneven at low frequency, foam is the wrong purchase and we will say so.
How is the order packed and what is the minimum?
The same minimums apply on export. Acoustic foam, 200 sq ft, about 19 sq m. BassBloc, 300 sq ft, about 28 sq m. Bass traps, 10 pieces. A BassBloc panel is 1800 x 900 mm, which is 1.62 sq m or about 17.4 sq ft, so the BassBloc minimum is roughly 17 panels. Compressed and boxed for foam, palletised flat for BassBloc.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.