Manufactured in India, supplied in Norway
Soundproofing materials in Norway
We manufacture soundproofing materials at our own plant at Palwal in Haryana, India, and supply them into Norway. Made at our own plant in India and shipped into Oslo, then road onward, with the domestic leg quoted separately because Norway is a long country.
- SoundBlanket MLV
- 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
- BassBloc
- 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Principle
- Mass, then decoupling, then cavity absorption, then sealing
- Test standards
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Lead time
- 4 to 7 working days for stock items
- ASTM E90 for the barrier, ASTM C423 for the absorber
- Made at our own plant, Palwal, Haryana, India
- One batch across the order, no blending between runs
We are the manufacturer. There is no local office and we do not claim approvals we do not hold. What you get is factory pricing, one consistent batch across the order, and a straight answer on what the material will and will not do.
01 / Start here
The material, and what it actually does on a Norway job
The blocking side of the range taken together: mass loaded vinyl, resilient layers, cavity absorption and the build-ups they belong in. This is the page for someone whose problem is noise getting through, not a room that sounds wrong.
Work reaching us from Norway is mostly timber buildings and apartments, offices, schools, healthcare, hotels, studios.
Timber frame housing and concrete apartment blocks, both with very tight envelopes and hard internal finishes.
- Independent leaf A second wall that does not touch the first. Nothing else comes close for the money.
- Resilient bar Where a full independent leaf will not fit. Effective, and very easy to short circuit with one wrong screw.
- Floating floor Resilient layer and deck, to break impact energy before it reaches the structure.
- What it will not do Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for our soundproofing materials are on the main product page. This page covers what that means for a project in Norway.
SoundBlanket mass loaded vinyl BassBloc sound absorber Wall soundproofing systems
02 / Data sheet
One specification sheet, the same in every market
These figures are published and they do not move. The thing worth arguing about is not the number on the sheet, it is which grade and which build-up suits the room you are treating.
- Light retrofit2.5 mm membrane. Where depth is not available
- Standard partition4 mm membrane on an independent leaf. The common specification
- Heavy6 mm membrane and full decoupling. Plant, machine enclosure, low frequency
| SoundBlanket MLV | 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6 |
|---|---|
| BassBloc | 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85 |
| Principle | Mass, then decoupling, then cavity absorption, then sealing |
| Test standards | ASTM E90 for the barrier, ASTM C423 for the absorber |
If a consultant has set the target, we will quote against their figures rather than ours, and stay out of the scope they own. More on working with acoustic consultants.
03 / In this market
What the buildings in Norway do to the specification
- Timber is light
Timber construction passes low frequency easily. Added mass and a decoupled layer do the work, and absorption alone will not.
- Classes are written and checked
Work arrives with a target and someone verifies it. Send us the class and we will say plainly where our material sits.
- Sealed through a long winter
Ventilation runs constantly in closed buildings, so plant noise matters far more than street noise.
- A long country
A site north of Oslo has a real domestic leg. We quote it separately so the programme is built on actual dates.
- Plant and HVAC
Balanced mechanical ventilation with heat recovery runs constantly through long heating seasons, so duct noise is always present.
- The housing stock
Timber frame housing and concrete apartment blocks, both with very tight envelopes and hard internal finishes.
Architects working in Norway usually need the build-up before the product. We will draw the section and mark what does the work. See how we support architects.
04 / Durability
What the Norway climate rules in and rules out
Norway is cool and damp, with long heating seasons and cold external walls, and that narrows the sensible material list before acoustics is even discussed.
Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would.
The risk we design against here is condensation behind linings in older, poorly insulated stock.
For a Norway interior where the finish leads, we will say plainly what each option costs you acoustically. See how we work with interior designers.
05 / Logistics
What the route into Norway actually looks like
| Ships from | Palwal, Haryana, India |
|---|---|
| Arrives at | Oslo, then road onward to site |
| Dispatch | 4 to 7 working days |
| Freight | Sea via Oslo |
| Packing | Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list. |
| Lead time | 4 to 7 working days for stock items. |
Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Sea freight into Oslo, then road onward to site. Air freight for samples and urgent quantities.
06 / Read this first
The things worth knowing before you place the order
-
The wrong product for the problem
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
-
Square footage quoted before the room is understood
Anyone can price a wall. Working out how much material the room actually needs usually reduces the order, which is why not everyone does it.
-
Suppliers who imply a Norway presence
Ask any supplier where the material is made and who carries the warranty. We make it at Palwal in Haryana and we say so on every page, including this one.
07 / In projects
In finished rooms
Norway: questions we are actually asked
Do you manufacture soundproofing materials in Norway?
No, and we will not say otherwise. We manufacture at our own plant at Palwal in Haryana, India, and supply into Norway as the manufacturer rather than through a dealer. Made at our own plant in India and shipped into Oslo, then road onward, with the domestic leg quoted separately because Norway is a long country. You buy at factory prices with one consistent batch across the order.
What do you look at first on a Norway enquiry?
Timber construction passes low frequency easily. Added mass and a decoupled layer do the work, and absorption alone will not. Work arrives with a target and someone verifies it. Send us the class and we will say plainly where our material sits. Those two things move the build-up far more than the panel figure does.
Does Norway weather shorten the life of this material?
Norway is cool and damp, with long heating seasons and cold external walls. Cold wall build-ups and long heating seasons mean interstitial condensation is a real risk behind any lining. PET felt is unaffected by damp air and will not feed mould where a fabric-faced mineral product would. The failure we design against here is condensation behind linings in older, poorly insulated stock.
How quickly can material reach a site in Norway?
ships from: Palwal, Haryana, India, arrives at: Oslo, then road onward to site, dispatch: 4 to 7 working days. Standard items dispatch in 4 to 7 working days. The sea leg from India is long, so plan the full door to door window into the programme. We give real dates, not optimistic ones.
Where do soundproofing materials fail to help?
Soundproofing fails at the gaps, not the materials. A service penetration, a back to back socket, or a door undercut will undo a correctly built wall. We would rather spend the conversation on the detail than on the product.
How is the order packed and what is the minimum?
Minimum order is confirmed with the quote. Rolls on core tubes, boards palletised, fixings and tapes listed on the same packing list.
Next step
Drawings in, BOQ and a delivered date out
One drawing gets you a proper answer. Build-up, quantities, a delivered date, and an honest note on anything we think is the wrong approach.