For projects in Noida
Venue and restaurant acoustics in Noida
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other. Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
- Containment
- Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
- Table level comfort
- Absorption at the ceiling so guests stop raising their voices at each other.
- Entrance and service
- Doors, lobbies and extract paths, which is where most of the leakage actually is.
- Quote
- From a plan and a section, within 48 hours
01 / The material
What this is, and what it changes in a Noida room
Two different jobs that get quoted as one: keeping bass inside the building for the neighbours, and making the room comfortable enough that guests can talk. Solving one does nothing for the other.
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
Work reaching us from Noida is mostly broadcast studios and edit suites, corporate offices, IT floors, apartment towers, schools, clinics.
- Broadcast rooms in ordinary buildings A news floor or edit suite inside a normal commercial shell has to isolate from lifts, corridors and plant before anything else is decided.
- We can be on site An hour from the plant. On a difficult room a visit is worth more than a long exchange of photographs.
- Corporate floors, hard finishes Glass cabins and hard flooring carry every call. The ceiling plane usually has to do the work.
- Containment Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope.
Full specification
Thickness, density, NRC by frequency, fire class, standard sizes and build-up detail for venue soundproofing are on the main product page. This page covers what that means for a project in Noida.
Nightclub and venue soundproofing SoundBlanket mass loaded vinyl
02 / The build-up
The stack, in the order it is installed
-
Layer 1
SoundBlanket mass loaded vinyl
A limp, high density sheet that adds mass to a partition, floor or duct without adding depth. In Noida, split units, VRF outdoor banks and diesel generator sets sit close to occupied areas, often on the same terrace as a bedroom. Generator enclosure and condenser screening are the recurring jobs.
Floor, floating. Membrane under a resilient layer and a floating deck, so impact energy is broken before it reaches the slab.
-
Layer 2
Wooden slat acoustic panels
Timber slats on an acoustic backing. In Noida, banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
Slats on a cavity. Backing plus an air gap behind moves absorption lower, which matters in music rooms.
-
Layer 3
Acoustic carpet and rugs
A tile carpet with a dense polyester face on a felt backing. In Noida, large government and private schools in concrete and tile with very large class sizes, and long open corridors that feed every classroom off them.
Loose lay on tackifier. Tiles lifted individually for access under a raised floor, which is why tile beats broadloom in an office.
For a Noida practice, the useful thing is a detail you can put in a drawing set, not a brochure. See how we support architects.
03 / In this market
What the buildings in Noida do to the specification
- Broadcast rooms in ordinary buildings
A news floor or edit suite inside a normal commercial shell has to isolate from lifts, corridors and plant before anything else is decided.
- We can be on site
An hour from the plant. On a difficult room a visit is worth more than a long exchange of photographs.
- Corporate floors, hard finishes
Glass cabins and hard flooring carry every call. The ceiling plane usually has to do the work.
- Towers going up fast
New residential towers where the same separating detail repeats across hundreds of flats.
- Assembly and performance rooms
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night.
04 / Room by room
Space by space, for Noida briefs
-
Containment
Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. A news floor or edit suite inside a normal commercial shell has to isolate from lifts, corridors and plant before anything else is decided.
- Soundproofing materials, 2100 kg per cubic metre. 2.5 mm STC 30 at 5.25 kg per sq m, 4 mm STC 34 at 8.4, 6 mm at 12.6
- Acoustic panels, 1800 x 900 mm, image printed into the felt rather than onto a facing
- Wooden slat acoustic panels, 2440 x 192 mm and 2440 x 128 mm
-
Table level comfort
Absorption at the ceiling so guests stop raising their voices at each other. An hour from the plant. On a difficult room a visit is worth more than a long exchange of photographs.
- Soundproofing materials, 1800 x 900 x 20 mm, 100 kg per cubic metre, NRC 0.85
- Acoustic panels, Cut pattern in PET felt, adds visual rhythm without changing the absorber
- Wooden slat acoustic panels, 14, 16 and 18 mm
-
Entrance and service
Doors, lobbies and extract paths, which is where most of the leakage actually is. Glass cabins and hard flooring carry every call. The ceiling plane usually has to do the work.
- Soundproofing materials, Mass, then decoupling, then cavity absorption, then sealing
- Acoustic panels, ASTM C423
- Wooden slat acoustic panels, 96 sq ft per unit
If the visual is fixed and the room still has to perform, that is a solvable problem and a conversation worth having early. See how we work with interior designers.
04 / Durability
The Noida climate decides the material list
Noida is hot summers, mild winters and a distinct wet season, and that narrows the material list before acoustics is discussed.
PET felt handles the wet months without absorbing moisture or feeding mould. Timber and wood wool want a ventilated cavity and a stable indoor RH.
The failure we design against here is wet-season humidity behind linings.
Where a consultant is already engaged on a Noida project, we supply to their specification and send the test reports rather than describing them. More on working with acoustic consultants.
06 / Read this first
What we watch go wrong on jobs like this
-
Panels on the wall as a neighbour noise solution
Small on the drawing, expensive on site, and almost always found after handover.
-
A lobby with both doors able to open at once
Soundproofing fails at the gaps, not the materials. One unsealed service penetration can undo a correctly built wall.
-
Extract ducting that bypasses every wall you built
Noise with a source is fixed at the source. Treating the receiving room is the expensive way to get a small result.
-
Treating it as a generic Noida job
A news floor or edit suite inside a normal commercial shell has to isolate from lifts, corridors and plant before anything else is decided.
05 / Supply
Getting it to Noida, with real dates
| Made at | Our own plant, Palwal, Haryana |
|---|---|
| Reaches site in | a day |
| Dispatch | 2 to 4 working days |
| To site | a day |
| Support | Drawings, build-ups, BOQ and material that arrives complete |
Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
Same day or next day by road from Palwal. Small consignments on a shared vehicle, full loads on a dedicated truck.
Questions from Noida projects
What makes venue and restaurant acoustics different in Noida?
Banquet halls, marriage lawns and auditoria are large hard volumes where amplified speech and music run late into the night. A news floor or edit suite inside a normal commercial shell has to isolate from lifts, corridors and plant before anything else is decided.
Where should the budget go first on a Noida project?
Containment. Low frequency through structure to flats above and beside. Mass, decoupling and a sealed envelope. Table level comfort. Absorption at the ceiling so guests stop raising their voices at each other.
Do you have an office or installation team in Noida?
No. We manufacture in India and supply into Noida. We give you drawings, build-ups, a BOQ and material that arrives complete, and we will tell you plainly when a job needs a local contractor we cannot be.
How does material get to a Noida site?
made at: Our own plant, Palwal, Haryana, reaches site in: a day, dispatch: 2 to 4 working days. Standard items dispatch in 2 to 4 working days from our plant at Palwal. Grooved panels and custom colours take longer, and we say so before you order, not after.
What goes wrong most often on this kind of project?
Panels on the wall as a neighbour noise solution. A lobby with both doors able to open at once.
What do you need from us to quote?
A plan, a section through the critical partition or ceiling, and what the room is for. From that we can give a build-up and a BOQ rather than a price per square foot.
Next step
Send the drawings, get a straight answer
We quote from drawings, not from a square foot rate. Send a plan and the section through the critical wall or ceiling and you will get something you can actually build from.